BOXD510MO Intel (CPU), BOXD510MO Datasheet - Page 50

• Manufacturer Part Number: BOXD510MO
• Manufacturer: Intel (CPU)

Specifications of BOXD510MO

• Lead Free Status / RoHS Status: Supplier Unconfirmed

2.2.2.4.1
2.2.2.4.2
2.2.2.4.3
2.2.2.4.4
50
Pins 1 and 3 can be connected to an LED to provide a visual indicator that data is
being read from or written to a hard drive. Proper LED function requires one of the
following:
•
•
Pins 5 and 7 can be connected to a momentary single pole, single throw (SPST) type
switch that is normally open. When the switch is closed, the board resets and runs the
POST.
Pins 2 and 4 can be connected to a single- or dual-color LED. Table 28 shows the
default states for a single-color LED.
Table 28. States for a One-Color Power LED
NOTE
The LED states listed in Table 28 are default settings that can be modified through
BIOS setup. Systems built with a dual-color front panel power LED can also use
alternate color state options.
Pins 6 and 8 can be connected to a front panel momentary-contact power switch. The
switch must pull the SW_ON# pin to ground for at least 50 ms to signal the power
supply circuitry to switch on or off. (The time requirement is due to internal debounce
circuitry on the board.) At least two seconds must pass before the power supply
circuitry will recognize another on/off signal.
LED State
Off
Blinking
Steady Green
SATA storage device connected to an onboard SATA connector
Intel Z-U130 USB Solid State Drive (or compatible device) connected to the
designated Z-U130 front panel USB header
Hard Drive Activity LED Header
Reset Switch Header
Power/Sleep LED Header
Power Switch Header
Description
Power off/hibernate (S5/S4)
Sleeping (S3)
Running/Away (S0/S1)