TEA5768HLBD NXP Semiconductors, TEA5768HLBD Datasheet - Page 34
![Tuners LO-PWR FM STEREO RADIO](/photos/16/2/160256/plf32_sml.jpg)
TEA5768HLBD
Manufacturer Part Number
TEA5768HLBD
Description
Tuners LO-PWR FM STEREO RADIO
Manufacturer
NXP Semiconductors
Datasheet
1.TEA5768HLV2157.pdf
(37 pages)
Specifications of TEA5768HLBD
Mounting Style
SMD/SMT
Package / Case
SOT-358
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
TEA5768HL/V2,157
Philips Semiconductors
16.5
Notes
1. For more detailed information on the BGA packages refer to the “(LF)BGA Application Note” (AN01026); order a copy
2. All surface mount (SMD) packages are moisture sensitive. Depending upon the moisture content, the maximum
3. These transparent plastic packages are extremely sensitive to reflow soldering conditions and must on no account
4. These packages are not suitable for wave soldering. On versions with the heatsink on the bottom side, the solder
5. If wave soldering is considered, then the package must be placed at a 45 angle to the solder wave direction.
6. Wave soldering is suitable for LQFP, QFP and TQFP packages with a pitch (e) larger than 0.8 mm; it is definitely not
7. Wave soldering is suitable for SSOP, TSSOP, VSO and VSSOP packages with a pitch (e) equal to or larger than
8. Image sensor packages in principle should not be soldered. They are mounted in sockets or delivered pre-mounted
9. Hot bar soldering or manual soldering is suitable for PMFP packages.
2004 Sep 13
BGA, HTSSON..T
VFBGA, XSON
DHVQFN, HBCC, HBGA, HLQFP, HSO, HSOP, HSQFP, HSSON,
HTQFP, HTSSOP, HVQFN, HVSON, SMS
PLCC
LQFP, QFP, TQFP
SSOP, TSSOP, VSO, VSSOP
CWQCCN..L
Low-power FM stereo radio for
handheld applications
from your Philips Semiconductors sales office.
temperature (with respect to time) and body size of the package, there is a risk that internal or external package
cracks may occur due to vaporization of the moisture in them (the so called popcorn effect). For details, refer to the
Drypack information in the “Data Handbook IC26; Integrated Circuit Packages; Section: Packing Methods” .
be processed through more than one soldering cycle or subjected to infrared reflow soldering with peak temperature
exceeding 217 C
must be kept as low as possible.
cannot penetrate between the printed-circuit board and the heatsink. On versions with the heatsink on the top side,
the solder might be deposited on the heatsink surface.
The package footprint must incorporate solder thieves downstream and at the side corners.
suitable for packages with a pitch (e) equal to or smaller than 0.65 mm.
0.65 mm; it is definitely not suitable for packages with a pitch (e) equal to or smaller than 0.5 mm.
on flex foil. However, the image sensor package can be mounted by the client on a flex foil by using a hot bar
soldering process. The appropriate soldering profile can be provided on request.
(5)
Suitability of surface mount IC packages for wave and reflow soldering methods
, SO, SOJ
(8)
, PMFP
(3)
, LBGA, LFBGA, SQFP, SSOP..T
(9)
10 C measured in the atmosphere of the reflow oven. The package body peak temperature
, WQCCN..L
PACKAGE
(8)
(1)
(3)
, TFBGA,
33
not suitable
not suitable
suitable
not recommended
not recommended
not suitable
WAVE
(4)
SOLDERING METHOD
(5)(6)
(7)
suitable
suitable
suitable
suitable
suitable
not suitable
TEA5768HL
Product specification
REFLOW
(2)