SFELF10M7JAA0-B0 Murata Electronics, SFELF10M7JAA0-B0 Datasheet - Page 86

• Manufacturer Part Number: SFELF10M7JAA0-B0
• Description: Electromechanical Filter 150KHz
• Manufacturer: Murata Electronics

Specifications of SFELF10M7JAA0-B0

• 3db Bandwidth: 150 KHz

19
!Note
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
sales representatives or product engineers before ordering.
!Note
Standard of Magazine Cassette
1. Putting CERAFILr into Magazine
2. Quality of Magazine
(1) Transparent so that input / output direction is visually
(2) With an angle of 35 CERAFILr should slip down
(3) Antistatic finish
(4) Recycling
3. Magazine should be packaged in a cardboard box.
84
Packaging
Peeling strength
(0.1 to 0.7N)
A magazine should contain 50pcs of CERAFILr, with
ground terminals all facing toward the "Murata" mark on a
magazine, and be closed with exclusive stoppers at both
ends. Above should be the minimum packaging unit.
CERAFILr 455kHz Lead Type CFWLA Series
MURATA model name, quantity and outgoing inspection
number should be indicated on the box.
Cardboard box may contain maximum 33 magazines
(1,650 pieces of filter).
Ceramic Trap 4.5-6.5MHz Chip Type TPSKA Series
Cover film
recognizable.
smoothly.
Note: Magazines should be sent back for recycling.
(Therefore, empty magazines should not be damaged.)
Continued from the preceding page.
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• Part number marked side is always facing upside.
• The feeding holes side of cavity tape is always input terminal.
ø1.5
Dimensions of Carrier Tape
+0.1
–0.0
10˚ max.
ø1.5
8.0 0.1
+0.1
–0.0
2.0 0.1 4.0 0.1
4.3 0.1
Chip filter
3˚ max.
User direction of feed
4. Dimensions of Magazine Cassette
Material: Polycarbonate
Camber of Case: 1mm max. against entire length (reference)
Twist of Case: 0.5mm max. (reference)
17.5 1.5
21.5 1.0
0.6
7.3 0.25
9.0 0.3
5.3 0.3
ø13.0 0.2
Dimensions of Reel
Trailer
160 to 190
2.2 0.5
Empty
Components
Continued on the following page.
576.0 2.0
Tolerance unless otherwise specified: 0.2
240 to 280 min.
Empty
muRataHP51M0064
400 to 560
Leader
Cover film
ANTISTATIC
(in mm)
(in mm)
P50E.pdf
10.2.9