FGG.0B.304.CLAD52Z LEMO, FGG.0B.304.CLAD52Z Datasheet - Page 208

• Manufacturer Part Number: FGG.0B.304.CLAD52Z
• Description: Conn Circular M 4 POS Solder ST Cable Mount 4 Terminal 1 Port
• Manufacturer: LEMO
• Type: Circularr
• Series: Br

Specifications of FGG.0B.304.CLAD52Z

• Gender: PL
• Termination Method: Solder
• Mounting: Cable Mount
• Body Orientation: Straight
• Connector Body Material: Brass
• Contact Gender: Pin
• Connector Mounting: Cable
• Insert Arrangement: 304
• Connector Type: Circular Industrial

The clamping system for 6E series connectors has been slightly modified as far as its dimensions are concerned. It includes
a long collet
ket from rotating during the clamping. When mating the assembly, the earthing collet is positioned onto the outer jacket. The
cable screen is folded back around the collet extremity and then soldered. The collet is closed with the help of the counter-
cone which is pressed against the collet when tightening the collet nut
nut is not used.
Type D cable clamping (FFL model 2S series)
This clamping system is assembled onto FFL plugs designed for crimp contacts. It includes the same components as the
B series, see page 207.
Type L cable clamping (S and 2C series)
This clamping system which includes in one part
cable shield to the connector shell. It is delivered only upon request and can only be assembled onto unipole or multipole
type connectors. This is the only possible clamping type for the 5S.112 type.
Type K cable clamping (S and E series)
This clamping system provides for screened or unscreened cables with diameters larger than maximum specified for each
series. It includes an oversize collet housing
ger split centre-piece
In standard watertight series (E series), the K type clamping type is completed by the flexible gasket
tightness on the cable end, by the metal washer
earthing cone
206
®
, an earthing collet
®
of the next series size up which clamps the shield onto the longer split centre-pieces
.
, a counter-cone
, the collet
10
4
the centre-piece and the collet, does not make it possible to connect the
which prevents the gasket from rotating during the clamping
, a flexible gasket
and the collet nut
2
4
10
. For assembling unscreened cables, the collet
9
and a metal washer
2
7
of the next series size up. It requires a lon-
8
6
2
5
6
which prevents the gas-
2
5
providing for water-
.
1
1
1
and the
1
1
1
1