120-8552-002 ITT Interconnect Solutions, 120-8552-002 Datasheet - Page 2

• Manufacturer Part Number: 120-8552-002
• Description: Connector Accessories Sure Seal For Plug 4 POS Black
• Manufacturer: ITT Interconnect Solutions
• Type: Sealr

SURE-SEAL
SURE-SEAL connectors – a series of low cost, UL
and CSA recognized environmental connectors.
The one-piece molded body and rugged multiple
moisture seals make the SURE-SEAL connector a
natural for applications whose outside contaminants
must be excluded.
One of the many features of the SURE-SEAL connector
is its simplicity. In addition to the contacts, only two
other parts – the connector bodies – are required to
complete the interconnect.
SURE-SEAL connectors were designed to meet the
increased requirements for safety and reliability in the
automotive field brought about by Department of
Transportation regulations. These sealed connectors
satisfy all of the parameters defined by automotive
/industrial standards including vibration, shock,
temperature cycling, salt water spray and immersion,
petroleum derivatives, industrial gas, and most
important low millivolt drop and low contact
resistance.
Reliability. Low Cost.
The ITT “Engineered Blocks” symbol and the composite ITT logo are registered trademarks of ITT Industries. © 2006.
Performance. Delivery.
Low Installed Cost
SURE-SEAL connectors are designed to be terminated by the O.E.M.
Field Service
When necessary, SURE-SEAL connectors can be changed, modified or
wired in the field.
One-Piece Molded Bodies
The SURE-SEAL connector incorporates a very simple one-piece molded
body. No other parts – other than contacts – are needed to assemble a
complete connector.
Low Cost Stamped Contacts
Without sacrificing quality, the cost of SURE-SEAL connectors is kept low
by using stamped contacts available on reels in a continuous strip for use
on the industry accepted 94-4510 or ACT 2500 semi automatic crimp
press. All contacts utilize a “B” type crimp.
Wide Wire Gage and Cable Accommodations
Ideally suited to be terminated on wires of size 0,5–1,5 mm
wire sizes with insulation in the range of 1,4—1,8, 1,8—2,8 and 2,4—3,3
mm, termination to multiconductor jacketed cables in the range of 5,3 to
8,4 mm diameter, and can be terminated to three different wire ranges with
total environmental sealing still assured.
Polarized Against Mis-Mates
SURE-SEAL connector mating faces are constructed with two stepped
planes; the plug and receptacle must be properly oriented in order for the
contacts to engage. For “blind” mating a raised indexing rib and matching
raised indexing spline has been added to the plug and receptacle.
Water Submersible
Not just splash proof, but truly submersible for short periods of time.
SURE-SEAL fulfills the requirements according to IP66A, DIN 40050. Note:
Although SURE-SEAL can withstand submersion, it is not designed to be
an underwater connector.
Resistant to Automotive/Commercial Environment
SURE-SEAL connectors are designed to meet temperatures from –40ºC to
105ºC under conditions of high humidity severe vibration, ice and mud.
Sealing integrity is still maintained with exposure to brake fluid, gasoline,
diesel fuel, anti-freeze, ultra violet, ozone, steam cleaning under normal
operating conditions.
Color coded
SURE-SEAL connectors are available in black, red, yellow, and green to
avoid mismating of other SURE-SEAL connectors with the same contact
arrangement.
Environment & Health
RoHS compliant
2
Specifications and dimensions subject to change
2
www.ittcannon.com
(AWG 14-20),