88013K NEWPORT ELECTRONICS, 88013K Datasheet - Page 50

• Manufacturer Part Number: 88013K
• Description: Test Probe
• Manufacturer: NEWPORT ELECTRONICS

Specifications of 88013K

• Test Probe Functions: Temperature
• For Use With: OS530, OS520 Series Handheld Infrared Thermometer
• Lead Free Status / RoHS Status: na

4.1 Sighting Scope
4.2 Installing and Operating the Sighting Scope
The Sighting scope is an accessory for the thermometer. It provides a visual
indication of the target being measured. Aiming at distant targets (up to
200 feet) becomes much easier by using the Sighting scope.
1. If the sighting scope is already installed on the thermometer,
2. The sighting scope comes with a pair of mounting clamps
3. Slide the pair of mounting clamps over the ”V“ grove of the
4. Using the two mounting screws of the clamp, tighten the sighting scope
5. Look through the sighting scope at an arm’s length. You will see
6. Aim at the target and pull the trigger.
go onto step 5.
already attached.
thermometer from back to front as shown in FIG 4-1. DO NOT remove
the protective label from the laser sight power contacts.
to the pair of clamps and the thermometer.
a crosshair indicating the center of the target being measured.
Since the sighting scope mounts on top of the thermometer, the line of
sight of the thermometer does not coincide with that of the sighting
scope, as shown in Fig. 4-1. The distance between the two lines of sight
(1
measuring distant targets (50 feet and longer).
11
⁄
1 6
") becomes less critical compared to the target size when
Sighting Scope
4
4-1