FLUKE-772 Fluke, FLUKE-772 Datasheet - Page 13
![MULTIMETER, DIGITAL, CLAMP](/photos/27/67/276721/4601796_sml.jpg)
FLUKE-772
Manufacturer Part Number
FLUKE-772
Description
MULTIMETER, DIGITAL, CLAMP
Manufacturer
Fluke
Specifications of FLUKE-772
Dmm Type
Clamp
Voltage Measuring Range Dc
0 To 30.00 V Dc
Current Measuring Range Dc
0mA To 100mA
Current Measuring Range Ac
0mA To 100mA
Dmm Functions
AC/DC Current
Current Ac Max
100mA
Ranging
Auto
Altitude
0 to 2000 m
Dimensions
1.63" × 3.0" × 9.75"
Humidity
<90% @ <30°C, <75% @ 30 to 55°C
Ip Rating
IP 40
Shock Resistance
1 m Drop Test (except jaw)
Temperature, Operating
-10 to 50 °C
Vibration
Random 2 g, 5 to 500 Hz
Lead Free Status / RoHS Status
na
Lead Free Status / RoHS Status
na
Cleaning the Meter
Clean the instrument case with a damp cloth and mild detergent.
Battery Replacement
To replace the batteries, see Figure 10:
1.
2.
3.
4.
5.
To avoid possible electric shock or personal injury, repairs
or servicing not covered in this manual should be
performed only by qualified personnel.
To avoid electrical shock, remove any input signals before
cleaning.
To avoid damaging the Meter, do not use aromatic
hydrocarbons or chlorinated solvents for cleaning. These
solutions will react with the plastics used in the Meter.
To avoid false readings, that could lead to possible electric
shock or personal injury, replace the batteries as soon as
the low battery indicator (B) appears.
Turn the Meter off.
Use a flat head screwdriver to loosen the battery compartment door
screw, and remove the door from the case bottom.
Remove the batteries.
Replace the batteries with four new AA batteries.
Reattach the battery compartment door to the case bottom and tighten
the screw.
Figure 11. Changing the Batteries
XW Warning
XW Warning
XW Warning
W Caution
fjv02.eps