72-7730 CALIBRATED TENMA, 72-7730 CALIBRATED Datasheet - Page 43

• Manufacturer Part Number: 72-7730 CALIBRATED
• Description: MULTIMETER DIGITAL HANDHELD, 4-1/2 DIGIT
• Manufacturer: TENMA

Specifications of 72-7730 CALIBRATED

• Dmm Type: Handheld
• Voltage Measuring Range Dc: 200mV - 1000V
• Voltage Measuring Range Ac: 2V - 1000V
• Current Measuring Range Dc: 200µA To 10A
• Current Measuring Range Ac: 200µA To 10A
• Lead Free Status / RoHS Status: na

2.
3.
Note
l
l
40
The LCD displays OL indicating the tested capacitor
is shorted or it exceeds the maximum range.
Capacitors larger than 400¦ÌF take longer time. The
analogue bar graph shows the time left before
finishing the measurement.
Set the rotary switch to
the Meter may display a fixed reading which is a
internal distributed capacitor value. For testing less
than 10nF capacitor, the tested value must subtract
the internal distributed capacitor value to maintain
the accuracy.
To improve the measurement accuracy of small value
capacitors (less than 10nF), press REL
test leads open to subtract the residual capacitance
of the Meter and leads.
It is recommended to use test clip to carry out
measurement to reduce the effect of internal
distributed capacitor.
measurement mode,
with the
l When capacitance measurement has been
completed, disconnect the connection between the
testing leads and the circuit under test and remove
the test leads away from the input terminals of the
Meter.
Model 72-7730: OPERATING MANUAL