M4SENET-100 OPTO 22, M4SENET-100 Datasheet - Page 2
![Computers, Network Interface Cards](/photos/27/52/275235/4552286_sml.jpg)
M4SENET-100
Manufacturer Part Number
M4SENET-100
Description
Computers, Network Interface Cards
Manufacturer
OPTO 22
Type
Communicationsr
Datasheet
1.M4SENET-100.pdf
(5 pages)
Specifications of M4SENET-100
Peak Reflow Compatible (260 C)
No
Leaded Process Compatible
No
Data Protocols
10Base-T or 100Base-TX Link
Interface
Ethernet
Network Protocols
TCP⁄IP
Primary Type
Interface
Special Features
Ethernet
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
For Use With
Micro Controllers
Form 1154-040819
DATA SHEET
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • Phone: (951) 695-3000 • (800) 321-OPTO • Fax: (951) 695-3095 • www.opto22.com
Description (continued)
Software
FactoryFloor version 3.1 or higher. FactoryFloor is Opto 22’ s powerful
suite of 32-bit industrial automation software for Microsoft
Windows
consists of four integrated components:
Specifications
Maximum Sessions
Data Rate
Maximum Distance
Humidity
Card Type
Transports Supported
Communications
Cable Type
Connectors
Current Draw
Jumpers (Internal)
Operating Temperature
Storage Temperature
•
•
•
The M4SENET-100 interface card is designed to work with
© 2004 Opto 22. All rights reserved. All trademarks, trade names, logos, and service marks referenced herein belong to their respective companies.
Inside Sales: (800) 321-OPTO • Product Support: (800) TEK-OPTO • (951) 695-3080 • Fax: (951) 695-3017 • Email: sales@opto22.com
OptoControl
OptoDisplay
OptoServer
development environment for machine control and
process applications
machine interface (HMI) and trending package, including
alarming
connects the controller network with the PC network
®
Item
95, Windows 98, and Windows NT
™
™
™
, a robust, OPC-compliant data server that
, a graphical, flowchart-based
, an intuitive, shared database, human-
Ethernet NIC, communication coprocessor
128 total; up to 128 for SNAP Ethernet I/O, up to 32 for host
or peer
Ethernet 10Base-T or 100Base-TX
10 or 100 Mbps auto-detected on Ethernet
19.2 Kbps or software selectable on serial port (maximum
115.2 Kbps)
Solid-core unshielded twisted pair, Category 5 recommended
100 meters from hub to node for single segments
One RJ-45 Ethernet
One five-position Phoenix type for serial port
1.00 Amps
Boot to kernel/Boot to loader
Normal operation/Restore factory defaults
0° to 70° C
-40° to 85° C
0–95% humidity, non-condensing
TCP/IP
Auxilliary: RS-232C (for maintenance and kernel downloads)
for 10 Mbps and required for 100 Mbps
®
. FactoryFloor
Specification
®
M4SENET-100 card. FactoryFloor versions 3.0 and above support
only the M4SENET-100, not the older M4SENETU or M4SENETC
Ethernet cards.
Fir mware
However, you may have to upgrade firmware for the controller in
which you install the card. The card requires a version 3.0 or higher
Opto 22 kernel in the controller. If necessary, you can use OptoTerm,
a utility included with FactoryFloor, to download an updated
controller kernel. For instructions, see Opto 22 form #1156, the
M4SENET-100 Installation Guide .
•
NOTE: FactoryFloor versions lower than 3.0 do not support the
The M4SENET-100 card comes with firmware already installed.
OptoConnect
database in the controller and Microsoft’s SQL Server
and Access databases.
INTERFACES
™
, a bidirectional link between the Opto 22
CONTROLLERS
MODULAR
page 2/5
®