D01627 DURATOOL, D01627 Datasheet - Page 2

• Manufacturer Part Number: D01627
• Description: WIRE STRIPPER, 0.08 - 6 MM2
• Manufacturer: DURATOOL

Specifications of D01627

• Stripping Capacity: 6mm2
• Svhc: No SVHC (15-Dec-2010)
• Colour: Black / Red
• Stripping Capacity Awg: 10AWG
• For Use With: Solid & Stranded Wires
• Lead Free Status / RoHS Status: na

D01627
The D01627 has been designed to remove insulation from wire and cables, ideal for installation electricians. The design of the tool
enables the user to strip cable of 6mm
depth adjuster (B); providing in the one tool what was previously only available by having several. The tool also has a cut off blade
(C) handling cable up to 6mm
Setting
To set the tool for the required cable size, adjust yellow levers as needed. Use these adjusters to set the jaws and cutting blade depth
for a clean insulation cut while preventing damage to the underlying conductor. For smaller diameter cables, the gripping pad adjuster
(A) is set further back. For thicker or harder insulation, blade depth adjuster (B) is set further forward. The final adjuster settings will
be a function of cable diameter and hardness of insulation.
Operation
Once set for the required cable size, the cable is inserted into the jaws of the tool and [he handles squeezed together. The D01627
will grip and strip the cable in one action; to release simply relax the grip on the tool at the end of the cycle. Where longer strip
lengths are required, the cable may be allowed to protrude from the side of the jaws prior to stripping.
Technical information
As wires and cables with the same nominal cross-sectional area will vary in diameter according to whether they have solid or
stranded conductors, and upon the thickness of insulation, no precise setting table is practical. D01627 incorporates a limiting self-
adjustment feature by use of a floating lower stripping jaw, safe and accurate stripping will take place across a range of settings.
Instructions:
Tool should not be used on live electrical circuits.
Not protected against electrical shock.
Always use CE/OSHA/ANSI or other approved eye protection when using tools.
Tool is not to be used for purposed other than intended.
Part Number Table
Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes
in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied.
The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data
sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage
resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded.
This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. DURATOOL is the registered trademark of the Group. © Premier Farnell plc 2009.
Ultrasonic Cleaning
Description
Stripper
Part Number
D01626
D01627
2
(10AWG) stranded copper conductor.
2
(10AWG) down to 0.08
2
Page 2
(27AWG) with an easy action gripping pad adjuster (A) and blade
14/10/09 V1.0