CS4205-KQR Cirrus Logic Inc, CS4205-KQR Datasheet - Page 45
![no-image](/images/manufacturer_photos/0/1/141/cirrus_logic_inc_sml.jpg)
CS4205-KQR
Manufacturer Part Number
CS4205-KQR
Description
Audio CODECs IC AC'97 Codec for Docking Stations
Manufacturer
Cirrus Logic Inc
Datasheet
1.CS4205-KQZ.pdf
(81 pages)
Specifications of CS4205-KQR
Number Of Adc Inputs
8
Number Of Dac Outputs
3
Conversion Rate
48 KSPs
Interface Type
Serial (5-Wire)
Resolution
18 bit, 20 bit
Maximum Operating Temperature
+ 70 C
Mounting Style
SMD/SMT
Package / Case
LQFP-48
Minimum Operating Temperature
0 C
Number Of Channels
1 ADC, 1 DAC
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
5.27
SPEN
Val
Fs
L
CC[6:0]
Emph
Copy
/Audio
Pro
Default
For a further discussion of the proper use of the channel status bits see application note AN22: Overview of Digital
Audio Interface Data Structures [3].
DS489PP4
SPEN
D15
S/PDIF Control Register (Index 68h)
D14
Val
D13
0
S/PDIF Enable. The SPEN bit enables S/PDIF data transmission on the SPDO/SDO2 pin.
The SPEN bit routes the left and right channel data from the AC ’97 controller, the digital mix-
er, or the digital effects engine to the S/PDIF transmitter block. The actual data routed to the
S/PDIF block are controlled through the SPDS[1:0]/AMAP/SM[1:0] configuration in the AC
Mode Control Register (Index 5Eh). This bit can only be ‘set’ if the SDO2 bit in the Serial Port
Control Register (Index 6Ah) is ‘0’. If the SDO2 bit is ‘set’, SPEN is a read-only bit and always
returns ‘0’.
Validity. The Val bit is mapped to the V bit (bit 28) of every sub-frame. If this bit is ‘clear’, the
signal is suitable for conversion or processing.
Sample Rate. The Fs bit indicates the sampling rate for the S/PDIF data. The inverse of this
bit is mapped to bit 25 of the channel status block. When the Fs bit is ‘clear’, the sampling
frequency is 48 kHz. When ‘set’, the sampling frequency is 44.1 kHz. The actual rate at which
S/PDIF data are being transmitted solely depends on the master clock frequency of the
CS4205. The Fs bit is merely an indicator to the S/PDIF receiver.
Generation Status. The L bit is mapped to bit 15 of the channel status block. For category
codes 001xxxx, 0111xxx and 100xxxx, a value of ‘0’ indicates original material and a value of
‘1’ indicates a copy of original material. For all other category codes the definition of the L bit
is reversed.
Category Code. The CC[6:0] bits are mapped to bits 8-14 of the channel status block.
Data Emphasis. The Emph bit is mapped to bit 3 of the channel status block. When ‘set’,
50/15 µs filter pre-emphasis is indicated. When is ‘clear’, no pre-emphasis is indicated.
Copyright. The Copy bit is mapped to bit 2 of the channel status block. If the Copy bit is ‘set’
copyright is not asserted and copying is permitted.
Audio / Non-Audio. The /Audio bit is mapped to bit 1 of the channel status block. If the /Audio
bit is ‘clear’, the data transmitted over S/PDIF is assumed to be digital audio. If the /Audio bit
is ‘set’, non-audio data is assumed.
bit is ‘clear’, consumer use of the audio control block is indicated. If the bit is ‘set’, professional
use is indicated.
0000h
Professional/Consumer. The Pro bit is mapped to bit 0 of the channel status block. If the Pro
D12
Fs
D11
L
CC6
D10
CC5
D9
CC4
D8
CC3
D7
CC2
D6
CC1
D5
CC0
D4
Emph Copy /Audio
D3
D2
CS4205
D1
Pro
D0
45