142-1000-012 Emerson Network Power, 142-1000-012 Datasheet - Page 225

• Manufacturer Part Number: 142-1000-012
• Description: RF Connectors EPOXY STAKED FEEDTHROUGH
• Manufacturer: Emerson Network Power

Specifications of 142-1000-012

• Product: Connector
• Lead Free Status / RoHS Status: Compliant

SMA Solder Type Straight Plugs
for Semi-Rigid Cable
Connectivity Solutions
Tel: [phone]
•
Fax: [phone]
Assembly Instructions
•
www.EmersonNetworkPower.com/connectivity
1. Identify connector parts. (3 piece parts)
2. Strip cable to dimensions shown. Do not nick cen-
3. Insert cable into body making sure cable jacket is
4. Snap “C” spring onto connector body groove.
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
ter conductor. Bevel the cable center conductor
per contact detail of SMA interface on page 24.
flush with front of body. Solder body to cable. Use
a minimum amount of heat to minimize cable
insulation movement. Trim expanded cable
insulation flush with front of body or fixture body
and cable during soldering to prevent insulation
expansion.
Compress “C” spring using 141-0000-904 com-
pression tool. Install coupling nut onto connector
body. Nut should spin freely.
(.141 Semi-Rigid)
CABLE GROUP
RG-402/U
142-0694-031
142-0694-036
PART NO.
225