K3TE-V114 Omron, K3TE-V114 Datasheet - Page 6

• Manufacturer Part Number: K3TE-V114
• Description: PANEL METER DC INPUTS
• Manufacturer: Omron
• Series: K3TEr
• Type: Voltmeterr

Specifications of K3TE-V114

• Measuring Range: 0 ~ 199.9mV
• Display Style: Red Characters, Black Background
• Display Type: LED
• Display Face Size: 3.78" L x 1.89" W (96.0 x 48.0mm)
• Display Digits: 4
• Display Digits - Height: 0.559" (14.20mm)
• Backlight: Without
• Mounting Type: Panel Mount
• Voltage - Supply: 100 ~ 120VAC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Termination: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: K3TEV114

Safety Precautions
Mounting
Recommended panel thickness is 1 to 3.2 mm.
When mounting, insert the Digital Panel Meter in the mounting hole
and make sure that the Digital Panel Meter is secured with mounting
hooks.
Always attach the Mounting Bracket before wiring the terminals. Also,
always remove the wiring before removing the Mounting Bracket.
Mount the Digital Panel Meter as horizontally as possible.
Never use the Digital Panel Meter in locations where corrosive gas
(particularly sulfide or ammonia gas) is generated.
As much as possible avoid use of the Digital Panel Meter in a loca-
tion subject to severe shock or vibration, excessive dust, or exces-
sive moisture.
Select a mounting location where the Digital Panel Meter can be
used at an ambient operating temperature −10° to 55°C.
No product is shipped with the unit label attached. Select a unit label
from the sheet provided, and attach it to the Digital Panel Meter.
Calibration
Calibrate the Digital Panel Meter regularly so that the Digital Panel
Meter can maintain processing accuracy.
Use a standard signal generator with an accuracy of 99.99% min. for
calibration.
For the precise calibration methods, refer to the Instruction Sheet for
the Digital Panel Meter.
After the front panel cover is removed to calibrate the K3TE, be sure
not to touch components other than the calibration adjustor. Keep
metal objects off the K3TE while calibrating, especially when power
is turned on.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
http://www.ia.omron.com/
In the interest of product improvement, specifications are subject to change without notice.
Accessories (Order Separately)
Water-resistive Soft Front Cover
Before mounting the Digital Panel Meter to a panel, attach the water-
resistive soft front cover and mounting bracket to the Digital Panel
Meter properly so that the Digital Panel Meter will maintain IP51
water-resistive standards. Before you calibrate Digital Panel Meters,
remove the water-resistive soft front cover. Refer to the operation
manual included with the Digital Panel Meter for the calibration pro-
cedure.
Note: Be sure to use the Water-resistive Soft Front Cover and
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
Soft Cover
mounting bracket together.
Mounting
Bracket
K3TE
6