G3MC-101P-VD DC12 Omron, G3MC-101P-VD DC12 Datasheet - Page 5

• Manufacturer Part Number: G3MC-101P-VD DC12
• Description: SOLID STATE RELAY
• Manufacturer: Omron
• Series: G3MCr

Specifications of G3MC-101P-VD DC12

• Circuit: SPST-NO (1 Form A)
• Output Type: AC, Zero Cross
• Load Current: 1A
• Voltage - Input: 9.6 ~ 14.4VDC
• Voltage - Load: 75 ~ 132 V
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Package / Case: 4-SIP
• Input Type: DC
• Input Voltage (max): 14.4V
• Output Voltage (max): 132V
• Output Current: 1A
• Isolation Voltage: 2.5kV
• Package Type: SIP
• Output Device: Triac
• Pin Count: 4
• Mounting: Through Hole
• Operating Temp Range: -30C to 80C
• Operating Temperature Classification: Commercial
• Rad Hardened: No
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• On-state Resistance: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: G3MC-101P-VDDC12; G3MC101PVDDC12

G3MC
Precautions
General Precautions
Be sure to turn off power to the SSR before wiring the SSR, other-
wise an electric shock may be received.
Do not touch the terminals of the SSR while power is being supplied
to the SSR. The terminals are charged with the power, and an elec-
tric shock may be received by touching the terminals.
The built-in capacitor may have a residual voltage after the SSR is
turned off. Be sure to discharge the residual voltage before touching
the terminals of the SSR, otherwise an electric shock may be re-
ceived.
Mounting
1.
2.
3.
Correct Use
The terminals of the SSR are highly heat-conductive. Each terminal
must be soldered within 10 s at 260 C or within 5 s at 350 C.
The SSR is of a thin-profile construction. To maintain the vibration
resistance of the SSR, make sure that the space between the SSR
and PCB is 0.1 mm maximum. Lifting of the PCB can be prevented
by setting the hole diameter of the PCBs on both sides slightly
smaller than the actual terminal dimension.
Select the model without the zero-cross function when using the
Unit for phase control output.
The casing works as a heat sink. When mounting two or more Units
closely, make sure that the Units are properly ventilated by taking
ambient temperature rises into consideration. If Units are closely
mounted and used in places with no ventilation, the load current of
each Unit must be 1/2 of the rated load current.
Cat. No. J108-E1-1B
Make sure that no excessive voltage or current is imposed on
or flows to the input or output circuit of the SSR, otherwise the
SSR may malfunction or burn.
Solder the terminals of the SSR properly under the required
soldering conditions. The SSR may be abnormally heated
and burn if power is supplied to the terminals soldered
incorrectly.
Do not short-circuit the load of the SSR while power is
supplied to the SSR. Do not short-circuit the power supply
through the SSR. The SSR may be damaged, malfunction, or
burn if the load or power supply is short-circuited.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Fusing characteristics
The G3MC has a function that forces an open mode failure when an
overcurrent exceeds the rated value. The fusing characteristics of
the G3MC, however, are not the same as those of a general-use
glass fuse. Machines that use the G3MC must be provided with a
safety device, such as a fuse or breaker, and ON-OFF tests or short-
circuit tests must be implemented to confirm the following items and
detailed influences. Users must determine test conditions and im-
plement tests on reliability as required by the machine.
Note: Contact your local OMRON sales office for more detailed
Protective Element
No overvoltage absorption element is built in. Therefore, if the
G3MC is connected to an inductive load, be sure to connect the
overvoltage absorption element.
G3MC-
G3MC-
Input
Input
1. Life test under continuous electric current
2. On-off cycle test
3. Influence by ambient temperature
4. Influence by power source frequency
5. Influence by power source voltage fluctuation
information.
PL (without Zero cross function)
P (with Zero cross function)
Phototriac
Phototriac
Protective
element
(MOV)
Protective
element
(MOV)
Load
Load
G3MC
Power
supply
Power
supply
229