G2A-432A-DC24 Omron, G2A-432A-DC24 Datasheet - Page 3

• Manufacturer Part Number: G2A-432A-DC24
• Description: RELAY
• Manufacturer: Omron
• Series: G2Ar

Specifications of G2A-432A-DC24

• Relay Type: General Purpose
• Circuit: 4PDT (4 Form C)
• Contact Rating @ Voltage: 0.5A @ 24VDC
• Coil Type: Standard
• Coil Current: 45mA
• Coil Voltage: 24VDC
• Control On Voltage (max): 19.2 VDC
• Control Off Voltage (min): 2.4 VDC
• Mounting Type: Socket
• Termination Style: Socketable
• Coil Voltage Vdc Nom: 24V
• Contact Current Max: 500mA
• Contact Voltage Ac Nom: 110V
• Contact Voltage Dc Nom: 24V
• Coil Resistance: 530ohm
• Contact Configuration: 4PDT
• Contact Form: SPST - NO
• Contact Rating: 1 A
• Contact Termination: PCB
• Mounting Style: Solder / Plug-In
• Power Consumption: 33 mW
• Contact Material: Gold Overlay Silver Palladium
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: G2A432ADC24

■ Contact Ratings
■ Characteristics
Note: 1. The data shown above are initial values.
■ Approved by Standards
UL508 (File No. E41515)
Load
Contact type
Contact material
Rated load
Rated carry current
Max. switching power
Contact resistance
(see note 2)
Operate time (see note 3)
Release time (see note 3)
Max. operating frequency
Insulation resistance
(see note 4)
Dielectric strength
Vibration resistance
Shock resistance
Error rate (level P)
(Reference value)
(see note 6)
Endurance
Ambient temperature
Ambient humidity
Weight
G2A-@-US
2. The contact resistance was measured with 0.1 A at 5 VDC using the voltage drop method.
3. The operate or release time was measured with the rated voltage imposed with any contact bounce ignored at an ambient temperature
4. The insulation resistance was measured with a 500-VDC megger applied to the same places as those used for checking the dielectric
5. The electrical endurance was measured at an ambient temperature of 23°C.
6. This value was measured at a switching frequency of 60 operations per minute.
of 23°C.
strength.
Classification
Model
http://www.ia.omron.com/
6 to 120 VAC
6 to 120 VDC
Crossbar bifurcated
Movable:
Fixed:
0.3 A at 110 VAC
0.5 A at 24 VDC
3 A
250 VAC, 125 VDC
100 mΩ max.
15 ms max.
15 ms max.
Mechanical: 18,000 operations/hour
Electrical: 1,800 operations/hour (under rated load)
100 MΩ min. (at 500 VDC)
1,500 VAC, 50/60 Hz for 1 min between coil and contacts and contacts of different polarities (700 VAC be-
tween contacts of same polarity)
Destruction: 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude)
Malfunction: 10 to 55 to 10 Hz, 0.5 mm single amplitude (1.0 mm double amplitude)
Destruction: 1,000 m/s
Malfunction: 100 m/s
1 mA at 100 mVDC
Mechanical:
Electrical:
Operating:–10°C to 40°C (with no icing or condensation)
Operating:5% to 85%
Approx. 38 g
Standard/Acr barrier equipped/Built-in operation
Coil ratings
indicator models (G2A-@-N)
AgAu-clad AgPd
AgPd
Resistive load (cosφ = 1)
100,000,000 operations min. (at operating frequency of 18,000 operations/hour)
5,000,000 operations min. (under rated load and at operating frequency of
1,800 operations/hour) (see note 5)
2
2
1 A 120 VAC (resistive load)
1 A 30 VDC (inductive load)
Contact ratings
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
0.2 A at 110 VAC
0.3 A at 24 VDC
Built-in diode/Built-in operation indicator models
30 ms max.
Inductive load (cosφ = 0.4) (L/R = 7 ms)
(G2A-@-N1)
G2A
3