ADNB-6002-EV Avago Technologies US Inc., ADNB-6002-EV Datasheet - Page 29

• Manufacturer Part Number: ADNB-6002-EV
• Description: OPT SENS BUNDLE W/A-6000 TL CLIP
• Manufacturer: Avago Technologies US Inc.

Specifications of ADNB-6002-EV

• Description/function: Laser Mouse Bundle
• Interface Type: SPI
• Product: Display Modules
• Touch Panel: No Touch Panel
• For Use With/related Products: ADNS-6000
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Extended_Config
Access: Read/Write
Data Type: Bit field
USAGE: Register 0x0b allows the user to change the configuration of the sensor. Shown below are the bits, their default
values, and optional values.
29
Field Name
Busy
BIT 3
Serial_NPU
NAGC
Fixed_FR
Field
Bit
Busy
7
Description
Read-only bit. Indicates if it is safe to write to one or more of the following registers: Frame_Period_
Max_Bound_Upper and Frame_Period_Max_Bound_Lower Frame_Period_Min_Bound_Upper and
Frame_Period_Min_Bound_Lower Shutter_Max_Bound_Upper and Shutter_Max_Bound_Lower
After writing to the Frame_Period_Maximum_Bound_Upper register, at least two frames must pass be-
fore writing again to any of the above registers. This bit may be used in lieu of a timer since the actual
frame rate may not be known when running in auto mode.
0 = writing to the registers is allowed
1 = do not write to the registers yet
Must always be one
Disable serial port pull-up current sources on SCLK, MOSI and NCS
0 = no, current sources are on
1 = yes, current sources are off
Disable AGC. Shutter will be set to the value in the Shutter_Maximum_Bound registers.
0 = no, AGC is active
1 = yes, AGC is disabled
Fixed frame rate (disable automatic frame rate control). When this bit is set, the frame rate will be
determined by the value in the Frame_Period_Maximum_Bound registers.
0 = automatic frame rate
1 = fixed frame rate
Reserved
6
Reserved
5
Address: 0x0b
Default Value: 0x08
Reserved
4
1
3
Serial_
NPU
2
NAGC
1
Fixed_FR
0