MTCBA-C1-EN2-N3-NAM Multi-Tech Systems, MTCBA-C1-EN2-N3-NAM Datasheet - Page 96

• Manufacturer Part Number: MTCBA-C1-EN2-N3-NAM
• Description: ROUTER WIRELESS DUAL CDMA
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® rCellr

Specifications of MTCBA-C1-EN2-N3-NAM

• Function: Transceiver, CDMA, Router
• Modulation Or Protocol: CDMA2000
• Frequency: 800MHz, 1.9GHz
• Applications: Verizon™ Networks (USA)
• Interface: RJ-45, RS-232
• Features: US Power Cord
• Voltage - Supply: 9 V ~ 32 V
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1067

Set Primary HA IP Address $QCMIPPHA
Description:
Syntax:
Values:
Set Secondary HA IP Address $QCMIPSHA
Description:
Syntax:
Values:
Multi-Tech Systems, Inc. CDMA C1 AT Commands Reference Guide (PN S000478C)
This command is used to set the primary HA address of the mobile for the currently active profile.
The command takes two arguments, a string corresponding to the IP address of the HA to be
stored and a number (either 0 or 1) indicating whether or not to commit this value to NV. The IP
address should be formatted in standard dotted-decimal notation; e.g., “10.1.1.20”.
Command syntax: AT$QCMIPPHA =<IP>,<Val>
<IP>
<Val>
Note: If the value provisioned is not committed to NV, the temporary value will be deleted.
This command is used to set the secondary HA address of the mobile for the currently active
profile. The command takes two arguments, a string corresponding to the IP address of the HA to
be stored and a number (either 0 or 1) indicating whether or not to commit this value to NV. The
IP address should be formatted in standard dotted-decimal notation; e.g., “10.1.1.20”.
Command syntax: AT$QCMIPSHA =<IP>,<Val>
<IP>
<Val>
Note: If the value provisioned is not committed to NV, the temporary value will be deleted.
Command
AT$QCMIPPHA?
Note: Display the current setting.
AT$QCMIPPHA =?
Note: Display the range of values.
AT$QCMIPPHA =10.1.2.15,1
Note: Set to 10.1.2.15, and commit to
NV.
Command
AT$QCMIPSHA?
Note: Display the current setting.
AT$QCMIPSHA =?
Note: Display the range of values.
AT$QCMIPSHA =10.1.2.15,1
Note: Set to 10.1.2.15, and commit to
NV.
0
1
0
1
IP address in standard dotted-decimal notation; e.g., “10.1.1.20”.
Do not commit to NV
Commit to NV
IP address in standard dotted-decimal notation; e.g., “10.1.1.20”.
Do not commit to NV
Commit to NV
Possible Responses
$QCMIPSHA: 10.1.1.20, 0
OK
$QCMIPSHA: ((0-255).(0-255).(0-255).(0-255)),(0-1)
OK
OK
Possible Responses
$QCMIPPHA: 10.1.1.20, 0
OK
$QCMIPPHA: ((0-255).(0-255).(0-255).(0-255)),(0-1)
OK
OK
Chapter 16 – Data Commands
96