MTCBA-G2-EN2-GP Multi-Tech Systems, MTCBA-G2-EN2-GP Datasheet - Page 9

• Manufacturer Part Number: MTCBA-G2-EN2-GP
• Description: ROUTER WIRELESS QUAD GPRS GPS
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® rCellr

Specifications of MTCBA-G2-EN2-GP

• Function: Transceiver, GPRS, Router
• Modulation Or Protocol: GSM, GPRS
• Frequency: 850MHz, 900MHz, 1.8GHz, 1.9GHz, 1575.42MHz
• Applications: General Purpose
• Interface: RJ-45, RS-232
• Sensitivity: -161dB
• Voltage - Supply: 9 V ~ 32 V
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1087

Multi-Tech Systems, Inc. Quick Start Guide
Setup Wizard Screen
IP Configuration
PPP Configuration
APN –
PPP –
to enable PPP.To issue commands to the modem, PPP must be
disabled and telnet port 5000 used.
Dial-on-Demand –
Idle Time Out –
before disconnecting. Setting the value to zero causes the link to
stay active continuously.
For GSM, the number is *99***1#.
For CDMA, the dial number is #777.
IP Address –
your own IP address.
Mask –
DNS –
is 0.0.0.0
Dial Number –
Enter the APN (Access Point Name) for GSM. The APN is
assigned by your wireless service provider.
APN does not apply for CDMA models.
Enter the primary DNS IP address for the system. The default
The default is 255.255.255.0
The default is Disable. To connect to the internet, you have
The default is 192.168.2.1. To change it, simply enter
Enter the dial number.
Sets the amount of time the PPP link stays active
The default is Disabled.
MultiModem rCell Intelligent Wireless Router
9