KSZ8851-16MLL Micrel Inc, KSZ8851-16MLL Datasheet - Page 69

• Manufacturer Part Number: KSZ8851-16MLL
• Description: Single Ethernet Port + Generic (16-bit) Bus Interface( )
• Manufacturer: Micrel Inc

Specifications of KSZ8851-16MLL

• Controller Type: Ethernet Controller, MAC/PHY
• Interface: Bus
• Voltage - Supply: 1.8V, 2.5V, 3.3V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 48-LQFP
• Operating Supply Voltage (typ): 3.3V
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 48
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 576-3292 - BOARD EVALUATION KSZ8851-16MLL
• Current - Supply: -
• Lead Free Status / RoHS Status: Compliant, Lead free / RoHS Compliant
• Other names: 576-3252

Example:
1. MIB Counter Read (read port 1 “Rx64Octets” counter at indirect address offset 0x0E)
Additional MIB Information
In the heaviest condition, the byte counter will overflow in 2 minutes. It is recommended that the software read all the
counters at least every 30 seconds.
MIB counters are designed as “read clear”. That is, these counters will be cleared after they are read.
August 2009
Micrel, Inc.
Offset
0x1C
0x1D
0x1E
0x1F
Counter Name
TxTotalCollision
TxExcessiveCollision
TxSingleCollision
TxMultipleCollision
Then
Write to reg. IACR (0xC8) with 0x1C0E (set indirect address and trigger a read MIB counters operation)
Read reg. IADHR (MIB counter value 31-16)
Read reg. IADLR (MIB counter value 15-0)
Table 13. Port 1 MIB Counters Indirect Memory Offsets
Description
Tx total collision, half duplex only
A count of frames for which Tx fails due to excessive collisions
Successfully Tx frames on a port for which Tx is inhibited by exactly one collision
Successfully Tx frames on a port for which Tx is inhibited by more than one collision
69
KSZ8851-16MLL/MLLI
M9999-083109-2.0