EVAL-AD5520EBZ Analog Devices Inc, EVAL-AD5520EBZ Datasheet - Page 13

• Manufacturer Part Number: EVAL-AD5520EBZ
• Description: Evaluation Board I.c.
• Manufacturer: Analog Devices Inc

Specifications of EVAL-AD5520EBZ

• Main Purpose: Test and Measurement, Per-pin Parametric Measurement Unit (PPMU)
• Utilized Ic / Part: AD5520
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Secondary Attributes: -
• Embedded: -
• Primary Attributes: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

THEORY OF OPERATION
The AD5520 is a single-channel per pin parametric measure-
ment unit (PPMU) for use in semiconductor automatic test
equipment. It contains programmable modes to force a pin
voltage and measure the corresponding current (FVMI), force
current measure voltage (FIMV), force current measure current
(FIMI), force voltage measure voltage (FVMV), and force
nothing measure voltage (FNMV). The PPMU can force or
measure a voltage from −11 V to +11 V. It can force or measure
currents up to 6 mA using the internal amplifier, while the
addition of an external amplifier enables higher current ranges.
External resistors allow users to choose the optimum ranges for
their needs.
The device provides a force sense capability to ensure accuracy
at the tester pin. A guard output is also available to drive the
shield of a force/sense pair.
Rev. B | Page 13 of 24
The AD5520 has an on-board window comparator that
provides two bits of useful information, DUT too low or too
high. Also provided on the chip is clamp circuitry that flags via
CLHDETECT and CLLDETECT if the voltage applied to FIN
or across the DUT exceeds the voltage applied to CLL and CLH.
On-chip is clamp circuitry that clamps the output of the force
amplifier if the voltage at MEASIOUT and MEASVOUT
exceeds CLL or CLH.
AD5520