350699-1 TE Connectivity, 350699-1 Datasheet - Page 4

• Manufacturer Part Number: 350699-1
• Description: UMNL SPLIT PIN PTPBR
• Manufacturer: TE Connectivity
• Type: Contactr

Specifications of 350699-1

• Gender: Pin
• Body Orientation: Straight
• Housing Material: Not Required
• Number Of Contacts: 1POS
• Number Of Ports: 1Port
• Number Of Terminals: 1
• Current Rating (max): 19A
• Pitch (mm): Not Requiredmm
• Contact Material: Brass
• Operating Temp Range: -55C to 125C
• Voltage Rating Max: 600VAC
• Mounting Style: Cable
• Termination Method: Crimp
• Contact Plating: Pre-Tin
• Product Height (mm): 3.68mm
• Product Depth (mm): 3.56mm
• Product Length (mm): 20.07mm
• Product Type: Contacts
• Contact Gender: Pin (Male)
• Voltage Rating: 600 V
• Current Rating: 19 A
• Termination Style: Quick Connect
• Wire Gauge Range: 24-18
• Product Line: Universal MATE-N-LOK
• Insulation Diameter (mm [in]): 1.02-2.54 [.040-.100]
• High Current: No
• Current Rating (a): 19
• Voltage (vac): 600
• Solder Tail Contact Plating: Pre-Tin
• Wire Range (mm [awg]): 0.20-0.80² [24-18]
• Contact Diameter (mm [in]): 2.18 [0.086]
• Pin Style: Split
• Stock Thickness (mm [in]): 0.30 [0.012]
• Contact Type: Pin
• Contact Termination Type: Crimp
• Contact Base Material: Brass
• Sealable: No
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Wire/Cable
• Packaging Method: Strip
• Lead Free Status / RoHS Status: Compliant

Housing lock strength.
Thermal shock.
Humidity/temperature cycling.
Salt spray corrosion.
Rev L
NOTE
Test Description
(a) Maximum rated current that can be carried by this product is limited by maximum operating
(b) Connector assemblies shall remain mated and shall show no evidence of cracking or
temperature of housings which is 105° C and temperat ure rise of contacts which is 30° C.
Variables which shall be considered for each application are wire size, connector size, contact
material and ambient temperature.
chipping.
133.4 N [30 lbf] minimum after
temperature-humidity cycling.
Dielectric withstanding voltage.
3.75 milliohms maximum
termination resistance, dry circuit.
See Note (b).
Dielectric withstanding voltage.
100 megohms minimum insulation
resistance.
6.0 milliohms maximum termination
resistance, dry circuit.
7.0 milliohms maximum termination
resistance, dry circuit.
ENVIRONMENTAL
Figure 1 (end)
Requirement
TE Spec 109-50.
Determine strength of housing
locking mechanism.
TE Spec 109-22.
Subject mated connectors to 25
cycles between -55 and 85° C.
TE Spec 109-23, Method III,
Condition B with cold shock and
-10° C and low frequency vibration
as specified.
Subject mated connectors to
humidity-temperature cycling
between 25 and 65° C at 95% RH.
TE Spec 109-24, Condition B.
Subject unmated connectors to 48
hours at 5% concentration.
Procedure
108-1031
4 of 8