350699-1 TE Connectivity, 350699-1 Datasheet - Page 3

• Manufacturer Part Number: 350699-1
• Description: UMNL SPLIT PIN PTPBR
• Manufacturer: TE Connectivity
• Type: Contactr

Specifications of 350699-1

• Gender: Pin
• Body Orientation: Straight
• Housing Material: Not Required
• Number Of Contacts: 1POS
• Number Of Ports: 1Port
• Number Of Terminals: 1
• Current Rating (max): 19A
• Pitch (mm): Not Requiredmm
• Contact Material: Brass
• Operating Temp Range: -55C to 125C
• Voltage Rating Max: 600VAC
• Mounting Style: Cable
• Termination Method: Crimp
• Contact Plating: Pre-Tin
• Product Height (mm): 3.68mm
• Product Depth (mm): 3.56mm
• Product Length (mm): 20.07mm
• Product Type: Contacts
• Contact Gender: Pin (Male)
• Voltage Rating: 600 V
• Current Rating: 19 A
• Termination Style: Quick Connect
• Wire Gauge Range: 24-18
• Product Line: Universal MATE-N-LOK
• Insulation Diameter (mm [in]): 1.02-2.54 [.040-.100]
• High Current: No
• Current Rating (a): 19
• Voltage (vac): 600
• Solder Tail Contact Plating: Pre-Tin
• Wire Range (mm [awg]): 0.20-0.80² [24-18]
• Contact Diameter (mm [in]): 2.18 [0.086]
• Pin Style: Split
• Stock Thickness (mm [in]): 0.30 [0.012]
• Contact Type: Pin
• Contact Termination Type: Crimp
• Contact Base Material: Brass
• Sealable: No
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Wire/Cable
• Packaging Method: Strip
• Lead Free Status / RoHS Status: Compliant

Physical shock.
Mating force.
Unmating force.
Contact insertion force.
Contact retention force.
Crimp tensile.
Durability.
Housing panel retention.
Rev L
Test Description
No discontinuities greater than 10
microseconds.
6.0 milliohms maximum termination
resistance, dry circuit.
See Note (b).
Will not exceed 5 pounds average
per contact when fully mated (based
on a sample size of (30) mated,
loaded housings).
6.67 N [1.5 lbf] maximum per
contact for split pins.
3.11 N [0.7 lbf} minimum per
contact for solid pins.
2.22 N [0.5 lbf] minimum per
contact for split pins.
22.2 N [5 lbf] maximum per contact. TE Spec 109-41.
66.7 N [15 lbf] minimum.
111.2 N [25 lbf] minimum for high
retention contacts.
Unmating force.
3.6 milliohms maximum termination
resistance, dry circuit.
333.6 N [75 lbf] minimum.
(mm
Wire Size
0.20 [24]
0.30 [22]
0.50 [20]
0.80 [18]
1.32 [16]
2.28 [14]
2
[AWG])
Figure 1 (continued)
Requirement
Crimp Tensile
(N [lbf] min)
133.4 [30]
200.2 [45]
222.4 [50]
62.3 [14]
62.3 [14]
35.6 [8]
TE Spec 109-26, Condition G.
Subject mated connectors to 50 G's
at 10 milliseconds. Three shocks in
each direction applied along 3
mutually perpendicular planes, 18
total shocks.
TE Spec 109-42, Condition A.
Measure force necessary to mate
connector assembly with locking
latches disengaged. Mount
connector in fixtures and perform
test at 12.7 mm [.5 in] per minute
incorporating free floating fixtures.
Calculate force per contact.
TE Spec 109-42, Condition A.
Measure force necessary to unmate
connector assembly with locking
latches disengaged. Mount
connector in fixtures and perform
test at 12.7 mm [.5 in] per minute.
Calculate force per contact.
Measure force to insert contact into
housing.
TE Spec 109-30, except grip wire.
Apply an axial load to contact at a
rate of 12.7 mm [.5 in] per minute.
TE Spec 109-16.
Determine crimp tensile at a rate of
25.4 mm [1 in] per minute.
TE Spec 109-27.
Manually mate and unmate
connector assemblies for 50 cycles.
Mount appropriate connector half in
panel and manually mate.
TE Spec 109-49.
Measure panel retention force using
nominal panel cut out dimensions
as specified in the Customer
Drawing.
Procedure
108-1031
3 of 8