MBB02070D4072BCT00 Vishay, MBB02070D4072BCT00 Datasheet - Page 4

• Manufacturer Part Number: MBB02070D4072BCT00
• Description: MBB/SMA 0207-25 0.1% CT 40K7
• Manufacturer: Vishay
• Type: Thin Filmr

Specifications of MBB02070D4072BCT00

• Power Rating(s): 2/5W
• Resistance: 40.7kohm
• Tolerance (+ Or -): 0.1%
• Temperature Coefficient: ±25
• Termination Style: Axial
• Operating Temp Range: -55C to 125C
• Case Style: Conformal
• Failure Rate: Not Required
• Lead Spacing (nom): Not Requiredmm
• Product Length (mm): 6.3mm
• Product Depth (mm): Not Requiredmm
• Product Height (mm): Not Requiredmm
• Construction: Cylindrical
• Lead Free Status / Rohs Status: Compliant

Notes
(1)
• Resistance ranges printed in bold are preferred TCR/tolerance combinations with optimized availability
DESCRIPTION
Production is strictly controlled and follows an extensive
set of instructions established for reproducibility. A
homogeneous film of metal alloy is deposited on a high grade
ceramic body and conditioned to achieve the desired
temperature coefficient. Plated steel termination caps are
firmly pressed on the metallized rods. A special laser is used
to achieve the target value by smoothly cutting a helical
groove in the resistive layer without damaging the ceramics.
A further conditioning is applied in order to stabilise the
trimming result. Connecting wires of electrolytic copper
plated with 100 pure tin are welded to the termination caps.
The resistors are covered by protective coating designed for
electrical,
terminations receive a final pure tin on nickel plating. Four or
five color code rings designate the resistance value and
tolerance in accordance with IEC 60062.
The result of the determined production is verified by an
extensive testing procedure performed on 100 of the
individual resistors. Only accepted products are stuck
directly on the adhesive tapes in accordance with
IEC 60286-1; IEC 60286-2.
ASSEMBLY
The resistors are suitable for processing on automatic
insertion equipment and cutting and bending machines.
Excellent solderability is proven, even after extended
storage. They are suitable for automatic soldering using
wave or dipping. The encapsulation is resistant to all
cleaning solvents commonly used in the electronics industry,
including alcohols, esters and aqueous solutions. The
suitability of conformal coatings, if applied, shall be qualified
by appropriate means to ensure the long-term stability of the
whole system. The resistors are completely lead (Pb)-free,
the pure tin plating provides compatibility with lead (Pb)-free
and lead-containing soldering processes. The immunity of
the plating against tin whisker growth has been proven under
extensive testing. All products comply with GADSL
the CEFIC-EECA-EICTA
hazardous substances. This includes full compliance with
the following directives:
Notes
(2)
(3)
Document Number: 28767
Revision: 05-Oct-09
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
TCR
± 25 ppm/K
± 15 ppm/K
Resistance values to be selected from E96 and E192 series, for other values please contact factory
Global Automotive Declarable Substance List, see
CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European
trade
www.eicta.org/index.php?id=1053&id_article=340
DESCRIPTION
organisation
mechanical
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Precision
TOLERANCE
± 0.25 %
± 0.25 %
± 0.1 %
± 0.1 %
representing
and
(3)
list of legal restrictions on
climatic
For technical questions, contact:
the
Precision Thin Film Leaded Resistors
MBA/SMA 0204
22 Ω to 332 kΩ
43 Ω to 332 kΩ
43 Ω to 221 kΩ
22 Ω to 221 kΩ
information
protection.The
www.gadsl.org
(2)
and
and
communications
[e-mail]
• 2000/53/EC End of Vehicle Life Directive (ELV) and
• 2002/95/EC Restriction of the use of Hazardous
• 2002/96/EC Waste Electrical and Electrical Equipment
APPROVALS
The resistors (CECC version) are approved within the
IECQ-CECC Quality Assessment System for Electronic
Components to the detail specification CECC 40101-806
which refers to EN 60115-1 and EN 140100 and the variety
of environmental test procedures of the IEC 60068 series.
Conformity is attested by the use of the CECC logo (
the Mark of Conformity on the package label for CECC
version.
Vishay
Manufacturer” in accordance with IEC QC 001002-3,
clause 2. The release certificate for “Technology Approval
Schedule” in accordance with CECC 240001 based on
IEC QC 001002-3, clause 6 is granted for the Vishay
BEYSCHLAG manufacturing process.
RELATED PRODUCTS
This product family of leaded thin film resistors for
professional applications is complemented by Zero Ohm
Jumpers.
For a corelated range of precision TCR and tolerance
specifications see the datasheet:
• “Professional Thin Film Leaded Resistors”, document no.
For products approved to CECC 40101-806, version E, with
established reliability and failure rate level E7 (Quality factor
π
• “Established Reliability Thin Film Leaded Resistors”,
Q
RESISTANCE VALUE
Annex II (ELVII)
Substances Directive (RoHS)
Directive (WEEE)
28766
document no. 28768
= 0.1), see the datasheet:
MBB/SMA 0207
10 Ω to 1 MΩ
10 Ω to 1 MΩ
10 Ω to 1 MΩ
10 Ω to 1 MΩ
BEYSCHLAG
technology
(1)
and
has
consumer
Vishay Beyschlag
achieved
MBE/SMA 0414
22 Ω to 1.5 MΩ
43 Ω to 1 MΩ
43 Ω to 1 MΩ
22 Ω to 1 MΩ
electronics),
“Approval
www.vishay.com
) as
see
of
75