M1-SYSMGMT-DEV-KIT-FP3 Actel, M1-SYSMGMT-DEV-KIT-FP3 Datasheet - Page 17

• Manufacturer Part Number: M1-SYSMGMT-DEV-KIT-FP3
• Description: MCU, MPU & DSP Development Tools System Management Development Kit
• Manufacturer: Actel

Specifications of M1-SYSMGMT-DEV-KIT-FP3

• Processor To Be Evaluated: AFS1500-FG484
• Interface Type: RS-232, USB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Ports
RS232
RS485
Ethernet 10/100 PHY
SMBUS Port
M1 System Management Board User’s Guide
This kit contains one RS-232 port with a MAX3221 transceiver that can be used for communications between the
M1AFS1500-FG484 device and a common serial port found on a PC or other RS-232 compatible device.
Note:
This kit contains one RS485 2-wire port with a MAX3362 that can be used for communications between the
M1AFS1500-FG484 device and a RS485 port. Necessary terminating resistors are provided on the board.
One MII ethernet port is provided on the part. It uses a DP83846A transceiver chip and an RJ-45 connector. This
directly interfaces with the M1AFS1500-FG484 device. Four LEDs are provided along with the port. See
Three ports ( J4, J5, and J71) are provided for SMBus communications. All signals directly interface with the
M1AFS1500-FG484 device. The connections are shown in
center-to-center connectors are used as the interface. 1.8-kΩ pull-ups are used for all the signals.
The RS-232 interface does not support hardware RTS/CTS hand shaking. The default configuration has the RTS
and CTS shorted together to create a loopback connection.
D2
D3
D4
D5
JP21
JP22
JP23
JP24
Pin 1
Pin 2
Pin 3
Pin 4
LED Reference Designator
Connector
Jumper
Table 2-7 · Connector Settings
Table 2-6 · Jumper Settings
Table 2-5 · LED Description
Table 2-6
and
Table 2-7 on page
Connections
Silkscreen
Settings
SPEED
1-GND
COL
3.3 V
SDA
SCL
FD
RX
1-2
1-2
1-2
1-2
17. 0.100 in x 0.100 in
Table
2-5.
Ports
17