20-101-0504 Rabbit Semiconductor, 20-101-0504 Datasheet - Page 138

• Manufacturer Part Number: 20-101-0504
• Description: ACCY CABLE&MOUNTING HDWR SR9050
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-0504

• Accessory Type: Smart Star Cable
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: SR9500
• Other names: 101-0504; 101-0504; 101-504; 101-504

3. Fasten the unit with the four 4-40 screws and washers included with the LCD/keypad
138
module. If your panel is thick, use a 4-40 screw that is approximately 3/16" (5 mm)
longer than the thickness of the panel.
Carefully tighten the screws until the gasket is compressed and the plastic bezel face-
plate is touching the panel.
Do not tighten each screw fully before moving on to the next screw. Apply only one or
two turns to each screw in sequence until all are tightened manually as far as they can
be so that the gasket is compressed and the plastic bezel faceplate is touching the panel.
Figure B-8. LCD/Keypad Module Mounted in Panel (rear view)
Smart Star (SR9000)