LPD-SOM-CLIP1 Logic, LPD-SOM-CLIP1 Datasheet - Page 21

• Manufacturer Part Number: LPD-SOM-CLIP1
• Description: CLIP RETENTION PLATE
• Manufacturer: Logic

Specifications of LPD-SOM-CLIP1

• Accessory Type: Retention Clip
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: SOM-M1
• Other names: 460-3502

5.5.4
5.6
PN 1013755 Rev 5
modes, power management states; peripheral power states and modes; product user scenarios;
interrupt handling; and display settings (resolution, backlight, refresh, bits per pixel, etc). These
settings are typically initialized in the startup software routines and may be modified later in the
operating system and application software. Information for these items can be found in the
appropriate documents such as the U-Boot User’s Manual, TI’s OMAP-L138 Low-Power
Applications Processor Datasheet and User Guides, TPS65070 Datasheet, and Logic’s
OMAP-L138 SOM-M1 Schematic.
Microcontroller
The OMAP-L138 processor’s power management scheme was designed for ultra-low power, so
naturally the static and dynamic power consumption has very flexible controls allowing designers
to configure the processor to minimize end-product power consumption. Most peripheral modules
can be powered on/off individually, and the core(s) can enter various levels of standby/sleep. To
implement a low-power system, users should review TI’s OMAP-L138 Low-Power Applications
Processor Datasheet and User Guides, TPS65070 Datasheet, and Logic’s OMAP-L138 SOM-M1
Schematic.
ESD Considerations
The OMAP-L138 SOM-M1 was designed to interface to a customer’s peripheral board, while
remaining low cost and adaptable to many different applications. The SOM does not provide any
onboard ESD protection circuitry—this must be provided by the product it is used in. Logic has
extensive experience in designing products with ESD requirements. Please contact Logic if you
need any assistance in ESD design considerations.
Logic Product Development Company, All Rights Reserved
PRELIMINARY DOCUMENT—SUBJECT TO CHANGE
OMAP-L138 SOM-M1 Hardware Specification
16