UDS100-B Lantronix, UDS100-B Datasheet - Page 27

• Manufacturer Part Number: UDS100-B
• Description: Ethernet Modules & Development Tools Single Port
• Manufacturer: Lantronix
• Type: Serial to Ethernetr

Specifications of UDS100-B

• Data Rate: 300 bps to 115.2 Kbps
• Product: Modules
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

UDS10/UDS100 User Guide
The following table displays available I/F Mode options:
The following table demonstrates how to build some common Interface Mode
settings:
Flow
Flow control sets the local handshake method for stopping serial input/output. Use
the following table to select flow control options:
Port Number
Every TCP connection and every UDP datagram has a destination IP address and a
port number. A port number is similar to an extension on a PBX system. For
example, a Telnet application commonly uses port number 23. Port number 9999 is
reserved for access to the unit's Setup Mode.
The Port Number setting represents the source port number in TCP connections. It is
the number that identifies the channel for remote initiating connections. For example,
to send data to channel 1, send TCP/UDP packets to this assigned port number.
The default setting for port 1 is 10001. The range is 1-65535, except for the following
reserved port numbers:
Common I/F Mode Setting
RS-232C, 8-bit, No Parity, 1 stop bit
RS-232C, 7-bit, Even Parity, 1 stop bit
RS-485 2-Wire, 8-bit, No Parity, 1 stop bit 0100 1111 4F
RS-422, 8-bit, Odd Parity, 1 stop bit
Flow Control Option
No flow control
XON/XOFF flow control
Hardware handshake with RTS/CTS lines 02
XON/XOFF pass characters to host
Table 5-4. Common Interface Mode Settings
I/F Mode Option Bit 7 6 5 4 3 2 1 0
RS-232C
RS-422/485
RS-485 2-wire
7 Bit
8 Bit
No Parity
Even Parity
Odd Parity
1 Stop bit
2 Stop bit
Table 5-3. Interface Mode Options
Table 5-5. Flow Control Options
Configuring the UDS Using Telnet or the Serial Port
27
0
1
1
1
0 0
1 1
0 1
1 0
1 1
0111 1000 78
0101 1101 5D
Binary
0100 1100 4C
1 1
0 0
0 1
01
Hex
00
05
Hex