UDS200-NL-01 Lantronix, UDS200-NL-01 Datasheet - Page 32

• Manufacturer Part Number: UDS200-NL-01
• Description: Ethernet Modules & Development Tools NON LABEL VERSION OF UDS200-01
• Manufacturer: Lantronix
• Type: Device Serversr

Specifications of UDS200-NL-01

• Data Rate: 200 Kbps
• Product: Modules
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Disconnect Mode
This option determines the conditions under which the unit causes a network
connection to terminate. In DisConnMode, DTR drop either drops the connection or is
ignored.
Note:
Flush Mode
Flush Mode (buffer flushing) controls line handling and network buffers with
connection startup and disconnect. You can select between two different packing
algorithms.
Note:
Available Flush Mode options are:
Function
Input Buffer (Serial to Network)
Clear with active connection (from serial)
Clear with passive connection (from network)
Clear with disconnect
Output Buffer (Network to Serial)
Clear with active connection (from serial)
Clear with passive connection (from network)
Clear with disconnect
Alternate Packing Algorithm (Pack Control)
Enable
1. The UDS sends the "Terminal Type" upon an outgoing connection.
2. A password is required for a connection to the serial port from the network.
3. The TCP connection closes even if the remote site does not acknowledge the disconnection.
4. When there is a network connection to or from the serial port, the state LED turns off instead of
5. When Ctrl D or Hex 04 is detected, the connection is dropped. Both Telnet mode and Disconnect with
Disconnect Mode Option
Disconnect with DTR drop
Ignore DTRa
Telnet mode and terminal type setup
Channel (port) password
Hard disconnect
Disable hard disconnect
State LED off with connection
Disconnect with EOT (^D)
blinking.
EOT must be enabled for Disconnect with EOT to function properly. Ctrl D is only detected going from
the serial port to the network.
To look up hex values, see
To look up hex values, see
Table 5-8. Disconnect Mode Options
3
Table 5-9. Flush Mode Options
2
5
4
31
B: Binary to Hexadecimal.
B: Binary to Hexadecimal.
1
Bit 7 6 5 4 3 2 1 0
1
0
Bit 7 6 5 4 3 2 1 0
1
1
1
1
1
1
0
1
1
1
1
1
1