787883-1 TE Connectivity, 787883-1 Datasheet - Page 3

• Manufacturer Part Number: 787883-1
• Manufacturer: TE Connectivity
• Type: SCSIr

Specifications of 787883-1

• Termination Method: Solder
• Body Orientation: Right Angle
• Gender: F
• Pitch (mm): 1.27mm
• Number Of Contacts: 200POS
• Contact Plating: Gold Over Nickel
• Housing Material: Polyester
• Mounting Style: Through Hole
• Product Type: Connector
• Profile: Low
• Pcb Mount Style: Through Hole (SMT Compatible)
• Pcb Mount Retention: With
• Pcb Mounting Orientation: Right Angle
• Type Of Connector: Blindmate
• Pcb Mount Alignment: Without
• Footprint (mm [in]): 8-Row [8-Row]
• Retention Leg Material: Brass
• Shell Material: Carbon Steel
• Ground Plate Material: Stainless Steel
• Guide Socket [pin] Material: Brass
• Locking Screw: Without
• Retention Leg Plating: Tin-lead over Nickel
• Termination Post Length (mm [in]): 2.49 [0.098]
• Solder Tail Contact Plating: Tin-Lead over Nickel
• Number Of Positions: 200
• Centerline (mm [in]): 1.27 [0.050]
• Pcb Mount Retention Type: Boardlock(s)
• Center Ground Plate: With
• Shell Plating: Nickel over Copper
• Guide Socket [pin] Plating: Nickel over Copper
• Contact Plating, Mating Area, Material: Gold (30)
• Connector Style: Receptacle
• Housing Temperature Rating: Standard
• Housing Color: Natural
• Rohs/elv Compliance: Not ELV/RoHS compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C
• Applies To: Printed Circuit Board
• Application: Box-to-Box
• Lead Free Status / RoHS Status: Not Compliant

Rev A
Mating force.
Unmating force.
Thermal shock.
Humidity-temperature cycling.
Temperature life.
Mixed flowing gas.
NOTE
Test Description
Shall meet visual requirements, show no physical damage, and meet requirements of additional
tests as specified in the Product Qualification and Requalification Test Sequence shown in Figure
2.
0.441 Newton maximum average
per contact.
0.147 Newton minimum average
per contact.
See Note.
See Note.
See Note.
See Note.
ENVIRONMENTAL
Figure 1 (end)
Requirement
TE Spec 109-42, Condition A.
Measure force necessary to mate
samples at a maximum rate of .5
inch per minute.
TE Spec 109-42, Condition A.
Measure force necessary to
unmate samples at a maximum
rate of .5 inch per minute.
TE Spec 109-22.
Subject unmated samples to 5
cycles between -55 and 85° C.
TE Spec 109-23-3, Condition B.
Subject unmated samples to 10
cycles between 25 and 65° C at
95%.
TE Spec 109-43.
Subject mated samples to
temperature life at 85° C for 300
hours.
TE Spec 109-85-2.
Subject mated samples to
environmental class II for 14 days.
Procedure
108-1752
3 of 7