787597-3 TE Connectivity, 787597-3 Datasheet - Page 3

• Manufacturer Part Number: 787597-3
• Manufacturer: TE Connectivity
• Type: SCSIr

Specifications of 787597-3

• Number Of Terminals: 40
• Termination Method: Solder
• Body Orientation: Straight
• Gender: RCP
• Number Of Ports: 1Port
• Pitch (mm): 1.27mm
• Number Of Contacts: 40POS
• Mounting Style: Through Hole
• Product Type: Connector
• Profile: High
• Pcb Mount Style: Through Hole
• Pcb Mount Retention: With
• Pcb Mounting Orientation: Vertical
• Type Of Connector: Blindmate
• Pcb Mount Alignment: With
• Pcb Mount Alignment Type: Post Polarization
• Retention Leg Material: Brass
• Color: Black
• Sealed Bottom: Without
• Product Series: Series I
• Retention Leg Plating: Tin over Nickel
• Termination Post Length (mm [in]): 4.57 [0.180]
• Solder Tail Contact Plating: Tin over Nickel
• Number Of Positions: 40
• Centerline (mm [in]): 1.27 [0.050]
• Pcb Mount Retention Type: Boardlock(s)
• Contact Plating, Mating Area, Material: Gold (30)
• Contact Base Material: Phosphor Bronze
• Connector Style: Receptacle
• Housing Temperature Rating: High
• Housing Material: Polyester
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C, Reflow solder capable to 245°C, Reflow solder capable to 260°C, Pin-in-Paste capable to 245°C, Pin-in-Paste capable to 260°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Printed Circuit Board
• Application: Fibre Channel Disk Drive, High Speed Serial Data, SCA2 (Single Connector Attachment)
• Lead Free Status / RoHS Status: Compliant

Vibration, random.
Physical shock.
Durability.
Mating force.
Unmating force.
Thermal shock.
Humidity-temperature cycling.
Temperature life.
Mixed flowing gas.
Rev A
NOTE
Test Description
Shall meet visual requirements, show no physical damage and shall meet requirements of
additional tests as specified in Test Sequence in Figure 3.
No discontinuities of 1 microsecond
or longer duration.
See Note.
No discontinuities of 1 microsecond
or longer duration.
See Note.
See Note.
110 grams maximum per contact.
15 grams minimum per contact.
See Note.
See Note.
See Note.
See Note.
ENVIRONMENTAL
Figure 2 (end)
Requirement
TE Spec 109-21-7.
Subject mated samples to 3.13 G's
rms. 1 hour in each of 3 mutually
perpendicular planes.
See Figure 6.
TE Spec 109-26-1.
Subject mated samples to 30 G's
half-sine shock pulses of 11
milliseconds duration. 3 shocks in
each direction applied along 3
mutually perpendicular planes, 18
total shocks.
See Figure 6.
TE Spec 109-27.
Mate and unmate samples for 500
cycles at maximum rate of 600
cycles per hour.
TE Spec 109-42, Condition A.
Measure force necessary to mate
samples at maximum rate of .5 inch
per minute.
TE Spec 109-42, Condition A.
Measure force necessary to unmate
samples at maximum rate of .5 inch
per minute.
TE Spec 109-22.
Subject mated samples to 5 cycles
between -55 and 105° C.
TE Spec 109-23-3, Condition B.
Subject mated samples to 10 cycles
between 25 and 65° C at 95% RH.
TE Spec 109-43.
Subject mated samples to
temperature life at 105° C for 1000
hours.
TE Spec 109-85-2.
Subject mated samples to
environmental class II for 14 days.
Procedure
108-1548
3 of 7