142-5701-206 Emerson Network Power, 142-5701-206 Datasheet - Page 226

• Manufacturer Part Number: 142-5701-206
• Manufacturer: Emerson Network Power
• Type: SMAr

Specifications of 142-5701-206

• Gender: F
• Body Style: Straight
• Terminate To: PCB
• Mounting Style: Through Hole
• Termination: Solder
• Operating Temp Range: -65C to 165C
• Body Plating: Nickel
• Contact Plating: Gold
• Contact Material: Beryllium Copper
• Insulation Material: Polytetrafluoroethyl
• Body Material: Brass
• Product Height (mm): 9.52mm
• Impedance: 50Ohm
• Lead Free Status / RoHS Status: Supplier Unconfirmed

226
Assembly Instructions
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
SMA Solder Type Straight Plugs
for Semi-Rigid Cable
Connectivity Solutions
Tel: [phone]
•
Fax: [phone]
•
www.EmersonNetworkPower.com/connectivity
(.086 Semi-Rigid)
(.141 Semi-Rigid)
CABLE GROUP
RG-405/U
RG-402/U
1. Identify connector parts. (3 piece parts)
2. Strip cable to dimensions shown. Do not
3. Place center contact on center conductor
4. Insert contact and cable into body making
5. Thread coupling nut over body.
nick center conductor. Slide coupling nut
onto cable as shown.
making sure contact bottoms against
cable insulation. Solder center conductor
to center contact through solder hole.
Solder must not be allowed to run on
outside of contact. Use a minimum
amount of solder for a good joint. .020
(0.51) diameter solder is recommended.
Trim excess insulation.
sure cable is bottomed against insulator
in body. Solder body to cable. Use a mini-
mum amount of heat to minimize cable
insulation movement.
142-0693-051
142-0693-056
142-0694-051
142-0694-056
PART NO.
.070 (1.78)
.070 (1.78)
.085 (2.16)
.085 (2.16)
“A”