1648317-1 TE Connectivity, 1648317-1 Datasheet - Page 3

• Manufacturer Part Number: 1648317-1
• Description: 702-31-01107=CONTACT,SKT,#8
• Manufacturer: TE Connectivity
• Type: Contactr
• Series: ELCONr

Specifications of 1648317-1

• Gender: SKT
• Body Orientation: Straight
• Housing Material: Not Required
• Number Of Contacts: 1POS
• Number Of Ports: 1Port
• Number Of Terminals: 1
• Pitch (mm): Not Requiredmm
• Contact Material: Copper Alloy
• Mounting Style: Cable
• Termination Method: Crimp
• Contact Plating: Silver
• Pin Or Socket: Socket
• Contact Termination: Crimp
• Wire Gauge: -
• Contact Finish: -
• Contact Finish Thickness: -
• Current Rating: -
• Lead Free Status / RoHS Status: Not Compliant

2.2. Customer Assistance
Product Part Number 1648578 and Product Code D033 are representative numbers of the ELCON Drawer
Series Connectors. Use of these numbers will identify the product line and expedite your inquiries through a
service network established to help you obtain product and tooling information. Such information can be
obtained through a local Tyco Electronics Representative or, after purchase, by calling the Product Information
number at the bottom of page 1.
2.3. Drawings
Customer Drawings for product part numbers are available from the service network. If there is a conflict
between the information contained in the Customer Drawings and this specification or with any other technical
documentation supplied by Tyco Electronics, call Product Information at the number at the bottom of page 1.
2.4. Specifications
Product Specification 108--2285 provides product performance and test information. Workmanship
Specification 101--654 is a guide for evaluating installed connectors for conditions which effect the cosmetics
and/or function of the connector.
2.5. Manuals
Manual 402--40 is available upon request and can be used as a guide in soldering. This manual provides
information on various flux types and characteristics along with commercial designations and flux removal
procedures. A checklist is included in the manual as a guide for information on soldering problems.
2.6. Instructional Material
Instruction sheets (408--series) contain detailed assembly instructions and repair procedures for product and
tooling. Documents available which pertain to this product are:
Document Number
3. REQUIREMENTS
3.1. Material
Crimp type contacts are made of copper alloy plated with silver or gold. Solder type contacts are made of brass
or copper alloy plated with silver or gold. The crown band is made of copper alloy plated with gold over nickel.
Hot plug contacts are made of copper alloy plated with gold. Connector housings are made of polyester, 30%
glass filled, UL94--V0.
3.2. Storage
3.3. Chemical Exposure
Rev D
NOTE
408--7516
408--10159
A. Ultraviolet Light
Prolonged exposure to ultraviolet light may deteriorate the chemical composition used in the connector
material.
B. Shelf Life
The connectors should remain in the shipping containers until ready for use to prevent deformation to the
contacts. The connectors should be used on a first in, first out basis to avoid storage contamination that
could adversely affect signal transmissions. The shelf life is six months from date of shipment.
Do not store connectors near any chemical listed below as they may cause stress corrosion cracking in
the contacts.
Alkalies
Amines
i
Silver- - plated contacts are shipped in silver- - saver packaging to prevent tarnishing until opened.
Ammonia
Carbonates
Document Title
Screw Machine Contacts and Application Tooling
Insertion/Extraction Tools for ELCON Circular Contacts
Citrates
Nitrites
Tyco Electronics Corporation
Phosphates Citrates
Sulfur Nitrites
Sulfur Compounds
Tartrates
3 of 17