7-5530843-5 TE Connectivity, 7-5530843-5 Datasheet - Page 4

• Manufacturer Part Number: 7-5530843-5
• Description: CONN SEC II 6 POS 100C/L
• Manufacturer: TE Connectivity
• Type: Card Edger

Specifications of 7-5530843-5

• Number Of Contacts: 12POS
• Number Of Contact Rows: 2
• Body Orientation: Straight
• Contact Plating: Gold Over Nickel
• Contact Material: Phosphor Bronze
• Termination Method: Solder
• Mounting Style: Through Hole
• Product Height (mm): 15.49mm
• Operating Temp Range: -55C to 85C
• Pitch (mm): 2.54mm
• Housing Material: Polyester
• Housing Color: Black
• Current Rating (max): 3/ContactA
• Voltage Rating Max: 400VAC
• Contact Resistance Max: 10
• Rohs Compliant: YES
• Product Type: Connector
• Product Series: Standard Edge II
• Type Of Connector: Standard
• Number Of Dual Positions: 6
• Post Type: Solder Post
• Pcb Mounting Orientation: Vertical
• Mounting Ears: Without
• Pcb Mount Retention: Without
• High Current: No
• Termination Post Length (mm [in]): 3.18 [0.125]
• Solder Tail Contact Plating: Tin
• Centerline (mm [in]): 2.54 [0.100]
• Retention Latch: Without
• Positions Unloaded: None
• Contact Plating, Mating Area, Material: Gold (30)
• Contact Base Material: Phosphor Bronze
• Underplate Material: Nickel
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Lead Free Status / RoHS Status: Compliant

176
Product Specifications
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Current Ratings
The chart below demonstrates the performance of the
CROWN EDGE power contact by showing the temperature
rise at different current levels applied to two power con-
tacts connected in series.
Current rating for any given application will depend,
among other things, on the module combination, PCB
copper trace volume, and internal equipment tempera-
ture/air flow. Mounting and mating to a bus bar will
increase current ratings.
Materials & Finishes
Insulators
Contacts
Electrical
Current
ratings
Insulation resistance
Dielectric strength
Mechanical
Mating PCB thickness
Insertion
Forces
Extraction
Forces
Tooling
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Non-hot-plug power contact
Hot-plug
power
contact
Signal contacts
Power contact
Signal contact
2 segment power module
3 segment power module
2 segment power module
3 segment power module
Power Connectors & Interconnection Systems
CROWN EDGE Card Edge-style High Current Connectors
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Contact
holder
CROWN BAND Beryllium copper alloy, selectively plated with gold (30 micro inches
element
PPA, UL 94-V-0 flammability rated, color black
Copper alloy, selectively plated with gold (30 micro inches minimum) and tin
on terminations, all over nickel
Phosphor bronze alloy, selectively plated with tin on terminations, over
nickel
Phosphor bronze alloy, selectively plated with gold
(30 micro inches minimum) and tin on terminations, all over nickel
35A (see graph below)
3A max.
5,000MΩ minimum at 500 VDC for 2 minutes,
power MIL-STD 1344, Method 3003
1,500VDC for 1 minute, per MIL-STD 1344, Method 3001
.062" 91.6 mm ±.006" (0.15 mm)
5.0 lbf typical using .062" (1.6 mm) thick mating board with 5 oz. of copper
6.0 lbf typical using .062" (1.6 mm) thick mating board with 5 oz. of copper
3.0 lbf typical using .062" (1.6 mm) thick mating board with 5 oz. of copper
5.0 lbf typical using .062" (1.6 mm) thick mating board with 5 oz. of copper
Press fixture is recommended for compliant press-fit assemblies
Consult Tyco Electronics customer service for details
Safety Regulatory Compliance
CROWN EDGE connectors have been evaluated by
Underwriters Laboratories and have been found to comply
with the requirements of U.S. standard UL1997 and
Canadian standard C22.2 No. 182.3-M1987.
Compliance with Current Interruption Requirements
Hot-plug CROWN EDGE modules are available for appli-
cations that require current interruption as defined by
safety regulatory agencies. These power-only modules
have been evaluated and recognized by Underwriters
Laboratories for current interruption up to 50 cycles as
per the UL1977 standard. See hot-plug requirements on
page 180.
minimum), over nickel
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
(Continued)