843996-6 TE Connectivity, 843996-6 Datasheet - Page 2

• Manufacturer Part Number: 843996-6
• Description: Contact Insertion/Extraction Tool
• Manufacturer: TE Connectivity
• Type: Toolr

Specifications of 843996-6

• Rohs Compliant: NA
• Product: Extraction Tool
• Features: Extraction Lance Reset Tools
• Lead Free Status / RoHS Status: RoHS Not Applicable
• For Use With: Micro MATE-N-LOK 3 Mm Contacts
• Lead Free Status / Rohs Status: RoHS Exempt Product

4. LOCKING LANCE RESET PROCEDURE
The tools described on this sheet are designed to
reposition depressed locking lances to ensure
retention in the housing. Check compatibility of the
contact and tool; then proceed as follows:
A
2
of 2
1. Orient the reset tip so the taper is facing the
locking lance.
2. Keep the reset tip against the contact and slide
it towards the base of the locking lance until it
bottoms.
3. Remove tool tip and contact will be ready for
re–insertion into the housing.
Lance Reset Tip
12.70 [.500]
Lance Reset
Angle of 17
6.35 [.250]
Wires
17.78 [.700]
Lance Reset Portion
Extraction/Lance
Reset Tool
Extraction/Lance Reset Tool 843996-6
(Figure 2B)
Figure 2
Figure 3
0.81 [.032]
B
5. TOOL INSPECTION/MAINTENANCE
Tool 843996–6 should conform to the dimensions
provided in Figure 3. It is recommended that each tool
be inspected upon its arrival to be sure it has not
been damaged in transit and at regularly scheduled
intervals to be sure it remains functional.
6. REVISION SUMMARY
CAUTION
4.57 [.180]
144.78 [5.700]
S Initial release of document
Lance Reset Portion
Locking Lance
Damaged contacts should not be used. If a
damaged contact is evident, it should be cut from
the wire and replaced with a new one.
Tip
Í Í Í Í Í Í Í Í
Í Í Í Í Í Í Í Í
3.81 [.150]
408-10020
Rev
A