TSOP36240TT Vishay, TSOP36240TT Datasheet - Page 6

• Manufacturer Part Number: TSOP36240TT
• Description: Infrared Receivers 2.7-5.5V 40kHz 45Deg
• Manufacturer: Vishay

Specifications of TSOP36240TT

• Carrier Frequency: 40 KHz
• Supply Current: 1.2 mA
• Transmission Distance: 35 m
• Viewing Angle: 45 deg
• Output Current: 10 mA
• Operating Voltage: 2.7 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 25 C
• Package / Case: SMD
• Transmission Range: 35m
• Directivity: 45°
• Supply Voltage Range: 2.7V To 5.5V
• Opto Case Style: SMD
• Operating Temperature Range: -25°C To +85°C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

TSOP362..
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters
ASSEMBLY INSTRUCTIONS
Reflow Soldering
• Reflow soldering must be done within 72 h while stored
• Set the furnace temperatures for pre-heating and heating
www.vishay.com
6
under a max. temperature of 30 °C, 60 % RH after opening
the dry pack envelope
in accordance with the reflow temperature profile as shown
in the diagram. Excercise extreme care to keep the
maximum temperature below 260 °C. The temperature
shown in the profile means the temperature at the device
surface. Since there is a temperature difference between
the component and the circuit board, it should be verified
that the temperature of the device is accurately being
measured
Drawing-No.: 6.544-5341.01-4
Issue: 8; 02.09.09
16776
1
1.27
Pick and place area. TR taping
0.5 ± 0.15
3 x 1.27 =
IR Receiver Modules for Remote
7.5
7.2
2.6
5.51
3.81
Control Systems
4
0.3
4x
R 1.7
0.4
A
• Handling after reflow should be done only after the work
Manual Soldering
• Use a soldering iron of 25 W or less. Adjust the
• Finish soldering within 3 s
• Handle products only after the temperature has cooled off
Not indicated tolerances ± 0.3
0.1
surface has been cooled off
temperature of the soldering iron below 300 °C
A
0.1
Footprint
1.27
3 x 1.27 = 3.81
(1.4)
2.9
0.9
Pick and place area. TT taping
4
technical drawings
according to DIN
specifications
Document Number: 82187
Rev. 2.1, 20-Jan-11