RC0805FR-1310KL Yageo, RC0805FR-1310KL Datasheet - Page 5

• Manufacturer Part Number: RC0805FR-1310KL
• Description: RESISTOR, THICK FILM, 10KOHM, 125mW, 1%
• Manufacturer: Yageo
• Series: RC0805r

Specifications of RC0805FR-1310KL

• Resistance: 10kohm
• Resistance Tolerance: ± 1%
• Power Rating: 125mW
• Voltage Rating: 150V
• Resistor Element Material: Thick Film
• Temperature Coefficient: ± 100ppm/°C
• Tolerance: 1 %
• Termination Style: SMD/SMT
• Package / Case: 0805 (2013 metric)
• Operating Temperature Range: - 55 C to + 155 C
• Dimensions: 1.25 mm W x 2 mm L x 0.5 mm H
• Product: Thick Film Resistors SMD
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

TESTS AND REQUIREMENTS
TEST
Life/Endurance
High
Temperature
Exposure/
Endurance at
Upper Category
Temperature
Moisture
Resistance
Thermal Shock
Short Time
Overload
Dec 14, 2010 V.0
Temperature
Coefficient of
Resistance
(T.C.R.)
Table 4 Test condition, procedure and requirements
Chip Resistor Surface Mount
TEST METHOD
IEC 60115-1 4.8
IEC 60115-1 4.25.1
IEC 60068-2-2
MIL-STD-202G Method-106G
MIL-STD-202G Method-107G
IEC60115-1 4.13
At +25/–55 °C and +25/+125 °C
Formula:
T.C.R= ------------------------- ×10
Where
t
t
R
R
At 70±5 °C for 1,000 hours, RCWV applied for
1.5 hours on, 0.5 hour off, still air required
1,000 hours at 155±5 °C, unpowered
Each temperature / humidity cycle is defined at 8
hours, 3 cycles / 24 hours for 10d. with 25 °C /
65 °C 95% R.H, without steps 7a & 7b,
unpowered
Parts mounted on test-boards, without
condensation on parts
Measurement at 24±2 hours after test conclusion
-55/+125 °C
Number of cycles required is 300. Devices
unmounted
Maximum transfer time is 20 seconds. Dwell time
is 15 minutes. Air – Air
2.5 times of rated voltage or maximum overload
voltage whichever is less for 5 sec at room
temperature
PROCEDURE
1
2
1
2
=+25 °C or specified room temperature
=–55 °C or +125 °C test temperature
RC-High power
=resistance at reference temperature in ohms
=resistance at test temperature in ohms
R
R
1
(t
2
–R
2
–t
1
1
)
SERIES
6
(ppm/°C)
0603 to 2512
REQUIREMENTS
Refer to table 2
±(1.0%+0.05 Ω) for 1% tol.
±(3.0%+0.05 Ω) for 5% tol.
±(1.0%+0.05 Ω) for 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
±(0.5%+0.05 Ω) for 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
±(0.5%+0.05 Ω) for 1% tol.
±(1%+0.05 Ω) for 5% tol.
±(1.0%+0.05 Ω) for 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
No visible damage
Product specification
www.yageo.com
5
8