1658655-1 Tyco Electronics, 1658655-1 Datasheet - Page 10

• Manufacturer Part Number: 1658655-1
• Description: D SUB SHELL, PLUG, SIZE 1, STEEL
• Manufacturer: Tyco Electronics
• Series: AMPLIMITE HDP-20r
• Type: DB09r

Specifications of 1658655-1

• Connector Shell Size: 1
• Connector Body Material: Metal
• Body Material: Steel
• Gender: Plug
• Connector Type: D Sub
• Number Of Positions: 9
• Number Of Rows: 2
• Flange Feature: Board Side (4-40)
• Features: Shielded
• Note: Contacts Not Provided
• Product: Standard Hoods & Connectors
• Number Of Positions / Contacts: 9
• Shell Plating: Tin over Copper
• Shell Size: 1
• Mounting Style: Cable
• Mounting Angle: Straight
• Termination Style: Crimp Snap
• Housing Material: Nylon
• For Use With: HDP-20 Series D Sub Connectors
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: A31493

3.7. Repair
Use Insertion/Extraction Tool 91285--1 (Instruction Sheet 408--9404) to remove individual contacts from
housings for replacement or for relocation to another housing cavity. Damaged or worn contacts may be
replaced provided there is sufficient slack, after restripping the wire, to insert the new contact.
4. QUALIFICATION
AMPLIMITE HDP--20 Subminiature D Commercial Connectors are Listed by Underwriters Laboratories Inc.
(UL) in File Number E--28476 and Certified by CSA International in File Number LR--16455. These connector
assemblies will also mate with any size 20 Subminiature D complying with the dimensions in Military Standard
MIL--C--24308.
5. TOOLING
AMPLIMITE HDP--20 Connector ferrules can be terminated to wire using hand, semi--automatic, or automatic
crimping tools. Recommended tooling, and instructional material, is provided in Figures 6 and 7.
AMPLIMITE HDP Series One--Piece Shield can be applied by using Seating Fixture 543615--1. The seating
fixture assembly is designed to fully seat a one--piece shield for an RFI/EMI shielded AMPLIMITE HDP
Connector Assembly for customer--applied overmolding. Refer to Instruction Sheet 408--4245 for specific
instructions on this application.
5.1. Braid Shielded Cable
Inner and outer crimp ferrules, used with braid--shielded cable only, are crimped with the tooling listed in the
table in Figure 6. These arrangements are able to stand alone, or may be used with a variety of shielded and
unshielded cable clamps.
The dies listed in this table must be inserted into corresponding tooling. Hand tool dies 543013--[ ] (Instruction
Sheet 408--9318) fit Hand Crimping Tool 543344--1 (Instruction Sheet 408--9315), while applicator dies (no
publication) fit Ferrule Applicator Assembly 812407--1 (Instruction Sheet 408--8083). The applicator is powered
by the AMP--O--LECTRIC Model “G” Terminating Machine 354500--[ ] (Customer Manual 409--5842).
The exact cable clamp used determines inner ferrule size and shape. The inner ferrule, in turn, determines the
dies. Some ferrules are stepped, and some straight; some stepped ferrules have a large flared end, some a
smaller flare. These differences are noted in the table.
10 of 13
CAUTION
OR CABLE CLAMP
!
CONNECTOR
SHELL SIZE
15 Position
9 Position
Size 1
Size 1
Size 2
Size 2
DO NOT re- - use damaged or worn contacts. Instead, replace them with new contacts and discard the old ones.
9.65--10.92 [.380--.430]
4 83 6 10 [ 190 240]
4.83--6.10 [.190--.240]
5.84--7.11 [.230--.280]
8.13--9.40 [.320--.370]
4 83 6 10 [ 190 240]
4.83--6.10 [.190--.240]
5.84--7.11 [.230--.280]
7.62--8.89 [.300--.350]
8.00--9.27 [.315--.365]
ACCEPTED
DIAMETER
CABLE
Figure 6 (cont’d)
Stepped (Large)
Stepped (Small)
TYPE (SIZE)
FERRULE
Stepped
Stepped
Stepped
Stepped
Straight
Straight
Straight
Straight
INNER
HAND TOOL
1--543013--7
1--543013--6
543013--2
543013--1
543013--6
543013--3
543013--2
543013--4
543013--6
543013--7
DIE SET
HAND TOOL
MARKING
DIE SET
C--1
C--8
C--2
C--4
B--1
A--1
B--8
B--3
B--1
B--3
APPLICATOR
813809 1
813809--1
813809--7
813809--5
813809 1
813809--1
813809--7
813809--2
813809--5
813809--3
DIE SET
114- 40030
Rev D