MCOG-UPE-1X-DM1 CYAN, MCOG-UPE-1X-DM1 Datasheet - Page 2

• Manufacturer Part Number: MCOG-UPE-1X-DM1
• Description: Enhanced Performance USB/Ethernet Peripheral Module
• Manufacturer: CYAN

Specifications of MCOG-UPE-1X-DM1

• Module Applications: Industrial Communication, Serial To USB Or Ethernet Conversion, Utility Metering, Security Systems
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Cyan Technology – USB / Ethernet Production Ready Module
2 of 8
Block diagram
Hardware Description
Microcontroller
The module uses a Cyan eCOG1X14Z5 microcontroller as the processor. This device has a
CPU core that operates at an internal clock frequency of up to 72 MHz, 512Kbytes of flash
memory and 24Kbytes of SRAM. It also has a wide range of peripheral functions, including the
Ethernet and USB interfaces used here.
Software development is performed using the CyanIDE environment. It includes a full C
compiler (gcc), source level debugger (gdb), Eclipse based IDE, and supports a direct debug
connection to the target processor through a dedicated serial interface (eICE).
Memory
In addition to the memory within the eCOG1X MCU device, the module includes an additional
16 Mbytes of on-board SDRAM and a standard card socket for an SD or MMC memory card.
The SDRAM is connected directly to the eCOG1X external memory interface bus. Software
support for the SD card includes both a low level device driver and a library that implements an
industry standard FAT file system.
USB
The eCOG1X MCU includes a USB peripheral with an on-chip PHY, supporting low speed
(1.5 Mb/s) and full speed (12 Mb/s) operation. Several standard USB host and peripheral
functions are supported with a comprehensive software library. Example projects for a range of
applications are included with CyanIDE as standard.
The module is available with either a B-type USB connector, suitable for USB peripheral
applications or an A-type, suitable for USB host.
10/100 Mb/s Ethernet
The eCOG1X includes an on-chip 10/100 Ethernet MAC. An external Micrel KSZ8041 device
provides a twisted-pair PHY, connected via a standard RJ45 connector.
V1.0
www.cyantechnology.com
8 December 2008
eCOG and CyanIDE are registered trademarks of Cyan Holdings plc