DP-810 BLACK 1.7 FL OZ 3M, DP-810 BLACK 1.7 FL OZ Datasheet - Page 6

• Manufacturer Part Number: DP-810 BLACK 1.7 FL OZ
• Description: ACRYLIC ADHESIVE CARTRIDGE 1.7FL.OZ
• Manufacturer: 3M
• Series: Scotch Weldr

Specifications of DP-810 BLACK 1.7 FL OZ

• Adhesive Type: Acrylic
• Adhesive Applications: Bonding - General Purpose
• Color: Black
• Dispensing Method: Cartridge
• Volume: 1.7fl.oz. (US)
• Body Material: Acrylic
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

3M
Low-Odor Acrylic Adhesives
DP810 • DP810 Black • DP810 NS
Surface Preparation
™
Scotch-Weld
3M™ Scotch-Weld™ Low-Odor Acrylic Adhesives can bond oily metal, plastic and
other substrates with very little surface preparation. However, for the most consistent
results and environmental resistance, all substrates should be clean, dry and free of
paint, oxide films, dust, mold release agents and all other surface contaminants. The
amount of surface preparation directly depends on the bond strength and
environmental resistance desired by the user.
The following cleaning methods are suggested for common surfaces.
Steel and Aluminum
Plastic/Rubber
*Note: When using solvents, extinguish all ignition sources and follow the
™
manufacturer’s precautions and directions for use.
1) Wipe free of dust with oil-free solvent such as acetone or isopropyl
2) Sandblast or abrade using clean fine grit abrasives (180 grit or finer).
3) Wipe again with solvent to remove loose particles.
4) If a primer is used, it should be applied within 4 hours after surface
Note: Aluminum may also be acid etched. Follow the manufacturer’s
1) Wipe with isopropyl alcohol. *
2) Abrade using fine grit abrasives (180 grit or finer).
3) Remove residue by wiping again with isopropyl alcohol. *
alcohol.
preparation (or see instructions pertinent to a specific primer).
precautions and directions for this procedure.
- 6 -