DP-810 BLACK 1.7 FL OZ 3M, DP-810 BLACK 1.7 FL OZ Datasheet - Page 5

• Manufacturer Part Number: DP-810 BLACK 1.7 FL OZ
• Description: ACRYLIC ADHESIVE CARTRIDGE 1.7FL.OZ
• Manufacturer: 3M
• Series: Scotch Weldr

Specifications of DP-810 BLACK 1.7 FL OZ

• Adhesive Type: Acrylic
• Adhesive Applications: Bonding - General Purpose
• Color: Black
• Dispensing Method: Cartridge
• Volume: 1.7fl.oz. (US)
• Body Material: Acrylic
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

3M
Low-Odor Acrylic Adhesives
DP810 • DP810 Black • DP810 NS
Handling/Curing
Information
™
Scotch-Weld
Directions for use:
Apply adhesive to clean, dry substrates, which are free of paint, oxide films, oils, dust,
mold release agents and all other surface contaminants. See the Surface Preparation
section for specific substrate preparation method.
50 ml cartridge:.
Place Duo-Pak cartridge in 3M™ EPX™ Applicator. Remove cap. Dispense and
discard a small amount of adhesive to assure even ratio and free flow. Clear orifice if
necessary. Attach mixing nozzle. Apply adhesive to clean surfaces, join parts, secure
until adhesive sets.
200/400 ml cartridge
While holding Duo-Pak cartridge in an upright position, remove and discard the insert
from the cartridge by unscrewing plastic nut and removing metal washer. Place
cartridge in a 1:1 200/400 ml EPX applicator. Dispense and discard a small amount of
adhesive to ensure even ratio and free flow. Attach mixing and nozzle and secure with
plastic retaining nut. Apply adhesive to clean surfaces, join parts, secure until
adhesive sets.
Clean-up:
Excess adhesive can be removed with solvent such as MEK. * Edge tack on a finished
part or bond line can be removed with isopropyl alcohol. *
*Note: When using solvents, extinguish all ignition sources and follow the
Heat Cure:
Full cure can be attained by raising the bondline temperature to 120°F (49°C) for
30 minutes or to 150°F (66°C) for 10 minutes.
™
manufacturer’s precautions and directions for use.
- 5 -