EICEUSB1X CYAN, EICEUSB1X Datasheet - Page 12

• Manufacturer Part Number: EICEUSB1X
• Description: ADAPTER, USB DONGLE, EICE
• Manufacturer: CYAN

Specifications of EICEUSB1X

• Development Tool Type: Programming Adapter
• Kit Contents: USB Lead, CyanIDE CD, Ribbon Cable
• Kit Contents Descriptive: USB Lead, CyanIDE CD, Ribbon Cable
• Kit Features: Cyan ECOG1X5A5 Device Provides USB
• Accessory Type: USB Debug Adaptor
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: Host PC System And ECOG Target Board

5
23 January 2008
The following recommendations should be observed when using the USB eICE adaptor.
•
•
•
•
Important Notes
Connect the USB cable from the eICE adaptor directly to the host PC, not via an
external hub. CyanIDE can fail to restart the eICE debug connection after any errors if
the USB device is connected via an external hub.
The memory window in CyanIDE can be quite slow to refresh across the USB eICE link.
Close the memory window when it is not required to improve the speed of response to
commands.
Do not disconnect the USB eICE cable or power down the target system while CyanIDE
is running. This can cause CyanIDE to hang up on the next attempt to connect to the
target system via eICE.
Ensure that CyanIDE is closed down before disconnecting the USB cable or powering
down the target system.
CyanIDE may report an error message on its first attempt to connect to the target
system via eICE. This occurs when it tries to find a connection to a target system on the
parallel port instead of the USB port. Repeat the command and CyanIDE should
connect to the USB eICE target system successfully.
If the debugger still does not start, check that power is present on the target system,
that all required jumper links are fitted, and that the USB cable is connected correctly to
the host PC.
Cyan Technology Ltd
Page 7