SK-96320-80PMC Fujitsu, SK-96320-80PMC Datasheet - Page 25

• Manufacturer Part Number: SK-96320-80PMC
• Description: F2MC-16FX Family Evaluation Board
• Manufacturer: Fujitsu

Specifications of SK-96320-80PMC

• Silicon Manufacturer: Fujitsu
• Features: In-Circuit Serial Flash Programming, Onboard Voltage Supervisor
• Silicon Family Name: MB96F32x
• Silicon Core Number: MB96320
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

5 Connectors
5.1 Power connector (X12)
The following figure shows the power connection jack X12. This connector is used to
connect an external unregulated DC power supply voltage (9V-12V DC) to the evaluation
board.
Connector X12:
It is recommended to use 9V DC input to minimize the power dissipation of the voltage
regulators.
5.2 Edge connector (X1, X2)
All pins (except oscillator Pins) of the microcontroller are directly connected to X1 and X2 as
follows:
The odd pin numbers are located on the one side and the even pin numbers are located on
the other side of the connector.
5.3 UART”A”, UART”B” connector (X3, X5)
Two 9-pin D-Sub female connectors are used
for the serial interface UART”A” and UART”B”.
TXD is the transmit output, RXD is the receive input.
The DTR or RTS signal can be used to generate a reset.
Please use a 1:1 cable for PC-connection.
© Fujitsu Microelectronics Europe GmbH
X2 (41 – 80)
Connector
X1 (1 – 40)
SK-96320-80PMC User Guide
Center is connected to ground (GND)
Chapter 5 Connectors
MCU Pins
Shield is connected to positive voltage supply
Connectors X3, X5:
41 – 80
1 – 40
- 25 -
5
9
GND DTR RxD TxD
FMEMCU-UG-960010-12
CTS RTS DSR
1
6