EB023 MATRIX, EB023 Datasheet - Page 7

• Manufacturer Part Number: EB023
• Description: INTERNET BOARD KIT, E-BLOCKS
• Manufacturer: MATRIX

Specifications of EB023

• Development Tool Type: Internet Board Kit
• Kit Features: E-blocks Compatible, Supports 10/100 Base TX, Half/Full Duplex Operation, Auto-negotiation
• Mcu Supported Families: PICmicro
• Tool / Board: RoHS Compliant
• Silicon Manufacturer: Matrix
• Core Architecture: PIC
• Kit Contents: Board
• Features: Supports Auto-Negotiation, E-Blocks Compatible
• Rohs Compliant: Yes

3. Test Procedure
This test routine will test the functionality of the three main protocol layers (MAC, IP, TCP).
The program will send an HTML webpage from the PICmicro® to the computer via the Internet board and the
connecting cable.
Visual clues will appear on the LCD display to ensure that the program is running.
This will confirm that the Internet Board is fully functional.
If you have problems with the refresh sequence repeat from step three above.
Troubleshooting
Copyright © Matrix Multimedia Limited 2005
1) Set up the Internet system as outline above
2) Apply power to Multiprogrammer board.
3) Download the test program.
4) Press Reset button on Multiprogrammer
5) Open up your Web browser
6) Type the following IP address in to your web browser: http://192.168.0.2
7) To ensure that the page is valid and current (i.e. not stored in your computers memory) you need to
8) The “page request” number will increment when the page is refreshed (with a rollover back to 1 upon
1) LCD fails to display “Starting up…”
2) Displays “Starting up…” but not “Complete.”
3) Are the Internet board and Ethernet connection LED’s flashing at all?
refresh the page. Press the “Refresh” button in your Web browser
reaching 9)
1. LCD display will display “Starting up…” and then “Complete” once the TCP/IP connection is
1. Note: Your home page may not open properly as it is not connected to your network
1. The LCD display will show “Sending HTML” during transmission.
1. Check power, connections, chip and check that the correct program has been downloaded to
1. TCP/IP connection not established
2. Check Internet board has power.
3. Check cross-over cable.
1. If they are then there is an IP Address or socket issue.
established.
the device.
E-blocks™ internet board
Document code: EB023-30-1
page 7