EM-LPC1300 EMBEST, EM-LPC1300 Datasheet - Page 19

• Manufacturer Part Number: EM-LPC1300
• Description: NXP LPC1300 ARM Cortex-M3 Evaluation Board
• Manufacturer: EMBEST

Specifications of EM-LPC1300

• Silicon Manufacturer: NXP
• Core Architecture: ARM
• Core Sub-architecture: Cortex-M3
• Features: RS232, USB, JTAG Interface, 12MHz XTAL Frequency
• Silicon Core Number: LPC13xx
• Silicon Family Name: LPC13xx

www.embedinfo.com/en
Chapter 5 Software development and examples
5.1 MDK Introduction
RealView MDK Development Suite is the latest software development tool of ARM Limited Corporation for
Embedded Processors. MDK4.01 integrates the most advanced technology in this industry, including μVision4
IDE and RealView RVCT4.0 Compiler; RealView MDK supports ARM7, ARM9 and the latest Cortex-M3 Core
Processor. It has a configuration wizard for startup code and integrates flash program module, powerful device
simulation, performance analyzer and so on. You can obtain MDK software from the CD released with
EM-LPC1300 Evaluation Board in the directory of 04-tools\Realview MDK4.01, or you can download the latest
version from Keil website www.keil.com. Double click the installation file setup.exe; finish Keil μVision4
installation under the guidance of the installation wizard. The installation interface as follows:
5.2 Compile routine
5.2.1 Open a routine
Enter in the folder of 03-software\Examples; Open the Embest_LPC1300.uvproj file in the project directory of
one routine. For example: \03-Software\Examples\01-Blinky\project\Embest_LPC1300.uvproj.
5.2.2 Compile the routine
1) If you need the .hex format file, then you can configure MDK to build the hex file, Click Select Folder for
Object… to specify the hex file’s output directory. Or you can skip this step.
19/26