SK-86R03 Fujitsu, SK-86R03 Datasheet - Page 17

• Manufacturer Part Number: SK-86R03
• Description: KIT, STARTER, JADE-L, MB86R03
• Manufacturer: Fujitsu
• Type: Evaluation Boardr

Specifications of SK-86R03

• Kit Contents: SK-86R03-01 Jade-L Eval Board, JTAG Debugger Mini-Board, TFT Display, Serial Cable, Power Supply, CD
• Mcu Supported Families: MB86R03
• Silicon Manufacturer: Fujitsu
• Features: RJ45 Ethernet Interface, SD-Card Interface, Dual
• Rohs Compliant: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

7
8
9
setenv netmask 255.255.0.0
saveenv
Note:
Your final configuration should be similar to that shown below:
Check the ethernet connection between the hardware by pinging the IP address of the
TFTP server. Enter ping <IP address of TFTP server>. If everything is OK, the console
will display a message such as 'Board is alive'
Downloading software from the PC to the evaluation board:
gatewayip and serverip represent the IP address of the TFTP server on the
evaluation board. If you can not change the IP address of your PC's network card,
change the ipaddr environment variable so that the Jade-L Evaluation Board is
reachable to the TFTP server on the PC (i.e. within the same subnet mask) e.g.
192.168.0.100/255.255.255.0 if your PC's network card is using e.g.
192.168.0.x/255.255.255.0)
Copy the plain binary file to the directory on your PC that is exported by your TFTP
server.
Download the software to the Jade-L Evaluation Board by typing:
tftp 0x40000000 software_name.bin
go 0x40000000
0x4000_0000 is the address the software is loaded to. You can change this.
go 0x40000000 jumps to this address and starts execution.
Please note that the system is already initialized by the Uboot loader. You must
therefore jump over your initialization to prevent errors. Just check your linker output
to get the right entry point address (e.g. main) .
17