ETRX357HR-LRS Telegesis Ltd, ETRX357HR-LRS Datasheet - Page 26

• Manufacturer Part Number: ETRX357HR-LRS
• Description: MODULE, ZIGBEE, ETRX3, PA+LNA, HIROS
• Manufacturer: Telegesis Ltd
• Series: -r

Specifications of ETRX357HR-LRS

• Rohs Compliant: YES
• Frequency: 2.4GHz
• Data Rate - Maximum: 250kbps
• Modulation Or Protocol: 802.15.4 Zigbee
• Applications: General Purpose
• Power - Output: 20dBm (100mW)
• Sensitivity: -106dBm
• Voltage - Supply: 2.1V ~ 3.6V
• Current - Receiving: 33mA
• Current - Transmitting: 140mA
• Data Interface: Solder Pad
• Memory Size: 128kB Flash, 12kB RAM
• Antenna Connector: U.FL
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

17.3 Storage Conditions
18 Packaging
18.1 Embossed Tape
©2009 Telegesis (UK) Ltd
(5)
(6)
(7)
(8)
(9)
(10) Mechanical stress during assembly of the board and operation has to be avoided.
(11) Pressing on parts of the metal cover or fastening objects to the metal cover is not
(1)
(2)
(3)
(4)
(5)
(6)
(1)
performance and reliability under the said special conditions carefully, to determine
whether or not they can be used in such a manner.
In liquid, such as water, salt water, oil, alkali, or organic solvent, or in places where
liquid may splash.
In direct sunlight, outdoors, or in a dusty environment
In an environment where condensation occurs.
In an environment with a high concentration of harmful gas (e.g. salty air, HCl, Cl2,
SO2, H2S, NH3, and NOx)
If an abnormal voltage is applied due to a problem occurring in other components or
circuits, replace these products with new products because they may not be able to
provide normal performance even if their electronic characteristics and appearances
appear satisfactory.
permitted.
The module must not be stressed mechanically during storage.
Do not store these products in the following conditions or the performance
characteristics of the product, such as RF performance, may well be adversely
affected:
Storage in salty air or in an environment with a high concentration of corrosive gas,
such as Cl2, H2S, NH3, SO2, or NOX
Storage in direct sunlight
Storage in an environment where the temperature may be outside the range of 5°C to
35°C range, or where the humidity may be outside the 45 to 85% range.
Storage (before assembly of the end product) of the modules for more than one year
after the date of delivery at your company even if all the above conditions (1) to (3)
have been met, should be avoided.
Dimension of the tape
t.b.d.
- 26 -
ETRX35x Preliminary Product Manual
ETRX351 AND ETRX357