HFCT-5006 Avago Technologies US Inc., HFCT-5006 Datasheet - Page 6

• Manufacturer Part Number: HFCT-5006
• Description: Fiber Optics, Evaluation Kit
• Manufacturer: Avago Technologies US Inc.

Specifications of HFCT-5006

• Silicon Core Number: HFCT-5954xxxZ, AFCT-5961xxxZ, AFCT-5964xxxZ
• Kit Contents: OC-3/OC-12 LC Evaluation Board, Associated Technical Literature
• Main Purpose: Interface, Fiber Optics
• Embedded: No
• Utilized Ic / Part: HFCT-595x, AFCT-596x
• Primary Attributes: SFF LC Singlemode for SONET/SDH, ATM Applications
• Operating Voltage: 3.14 V to 3.47 V
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Secondary Attributes: -
• Lead Free Status / Rohs Status: Details

Connection Diagram
Figure 5. Pin Out Diagram (Top View)
Pin Descriptions:
Pin 1 Receiver Signal Ground V
Directly connect this pin to the receiver ground plane.
Pin 2 Receiver Power Supply V
Provide +3.3 V dc via the recommended receiver
power supply filter circuit. Locate the power supply
filter circuit as close as possible to the V
the filter circuit should not cause V
minimum specification.
Pin 3 Signal Detect SD:
Normal optical input levels to the receiver result in a
logic “1” output.
Low optical input levels to the receiver result in a logic
“0” output.
This Signal Detect output can be used to drive a LVPECL
input on an upstream circuit, such as Signal Detect
input or Loss of Signal-bar.
Pin 4 Receiver Data Out Bar RD-:
No internal terminations are provided. See recommend-
ed circuit schematic.
Pin 5 Receiver Data Out RD+:
No internal terminations are provided. See recommend-
ed circuit schematic.
6
RECEIVER SIGNAL GROUND
RECEIVER POWER SUPPLY
RECEIVER DATA OUT BAR
RECEIVER DATA OUT
SIGNAL DETECT
o
o
o
o
o
CC
RX
EE
1
2
3
4
5
RX:
RX:
View
Top
10
TX
9
8
7
6
o
o
o
o
o
CC
CC
to drop below
TRANSMITTER DATA IN BAR
TRANSMITTER DATA IN
TRANSMITTER DISABLE
TRANSMITTER SIGNAL GROUND
TRANSMITTER POWER SUPPLY
RX pin. Note:
Mounting Studs/
Solder Posts
Pin 6 Transmitter Power Supply
V
Provide +3.3 V dc via the recommended transmitter
power supply filter circuit. Locate the power supply
filter circuit as close as possible to the V
Pin 7 Transmitter Signal Ground
V
Directly connect these pins to the transmitter signal
ground plane.
Pin 8 Transmitter Disable T
Optional feature, connect this pin to +3.3 V TTL logic
high “1” to disable module. To enable module connect
to TTL logic low “0”.
Pin 9 Transmitter Data In TD+:
No internal terminations are provided. See recommend-
ed circuit schematic.
Pin 10 Transmitter Data In Bar TD-:
No internal terminations are provided. See recommend-
ed circuit schematic.
Mounting Studs/Solder Posts
The two mounting studs are provided for transceiv-
er mechanical attachment to the circuit board. It is
recommended that the holes in the circuit board be
connected to chassis ground.
CC
EE
TX:
TX:
DIS
:
CC
TX pin.