102PMBS-G1 EDWARDS SIGNALING PRODUCTS, 102PMBS-G1 Datasheet - Page 3

• Manufacturer Part Number: 102PMBS-G1
• Description: LAMP, STACKABLE, INDICATOR
• Manufacturer: EDWARDS SIGNALING PRODUCTS

Specifications of 102PMBS-G1

• Bulb Size: 76mm
• Supply Voltage: 24V
• Current Rating: 1.75A
• Ip/nema Rating: IP65 / NEMA 3R, 4X
• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Maintenance
Light Source Replacement
1. Loosen captive screws and remove cover of affected lens
2. Remove the light source assembly from the lens module.
3. Install new light source assembly ensuring that the four prongs
module.
on the PC board are aligned with the plug located in the back
of the lens module.
Mounting gasket
#10-24 Hex nut
D
F
Figure 4. Optional 102PMF Mounting Kit Assembly
4.
Cleaning
The lens surfaces should be periodically dusted and cleaned with
a dry soft clean cloth to maintain optimum light visibility. If
necessary, the outside of the lens may be cleaned with water and
a mild detergent on a well rung-out, soft, clean cloth.
To prevent leakage, ensure the magnifier ring on
the lens cover and the magnifier ring on the lens
module are aligned (Figure 3).
Replace lens cover and secure using two captive screws.
(4) #10-24 x 1" (25 mm)
WARNING
pan head screws
Pan head, thread forming,
terminal cup washer
(4) o-rings
Pipe mount flange
ground ( ) screw
Cat. No. 102PMF
Wire retention
#10-16 x 3/8"
C
B
G
A
H
#10 Star washer
External tooth
E
P/N 3100669 ISSUE 1