PS9587L2-E3-A NEC, PS9587L2-E3-A Datasheet - Page 14

• Manufacturer Part Number: PS9587L2-E3-A
• Description: OPTOCOUPLER, DIGITAL O/P, SMDIP-8
• Manufacturer: NEC

Specifications of PS9587L2-E3-A

• No. Of Channels: 1
• Input Current: 10mA
• Output Voltage: 7V
• Opto Case Style: SMD
• No. Of Pins: 8
• Operating Temperature Range: -40°C To +85°C
• Package /: RoHS Compliant
• Isolation Voltage: 5kV
• Output Type: Transistor
• Optocoupler Output Type: Transistor
• Rohs Compliant: Yes

NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
(2) Wave soldering
(3) Soldering by Soldering Iron
14
• Peak reflow temperature
• Time of peak reflow temperature
• Time of temperature higher than 220°C
• Time to preheat temperature from 120 to 180°C
• Number of reflows
• Flux
• Temperature
• Time
• Preheating conditions
• Number of times
• Flux
• Peak Temperature (lead part temperature)
• Time (each pins)
• Flux
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead
(b) Please be sure that the temperature of the package would not be heated over 100°C
260°C or below (molten solder temperature)
10 seconds or less
120°C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
120˚C
(preheating)
120±30 s
Data Sheet PN10678EJ03V0DS
350°C or below
3 seconds or less
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
180˚C
PS9587,PS9587L1,PS9587L2,PS9587L3
260°C or below (package surface temperature)
10 seconds or less
60 seconds or less
120±30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Time (s)
(heating)
to 60 s
to 10 s
260˚C MAX.
220˚C