LMG7520RPFC(G) HITACHI, LMG7520RPFC(G) Datasheet - Page 21

• Manufacturer Part Number: LMG7520RPFC(G)
• Description: LCD MODULE, GRAPHIC
• Manufacturer: HITACHI

Specifications of LMG7520RPFC(G)

• Lcd Display Type: STN
• Pixel Size (h X W): 0.3mm X
• Viewing Area (h X W): 75.5mm X 100mm
• Supply Voltage: 5V
• Operating Temperature Range: 0°C To +40°C
• Display Mode: Transmissive
• Pixel Pitch (h X W): 0.3mm X 0.3mm
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

KAOHSIUNG HITACHI
ELECTRONICS CO.,LTD.
11.3 CAUTION AGAINST STATIC CHARGE
11.4 POWER ON SEQUENCE
11.5 PACKAGING
(1) NO. LEAVING PRODUCTS IS PREFERABLE IN THE PLACE OF HIGH
(2) SINCE UPPER POLARIZERS AND LOWER ALUMINUM PLATES TEND TO
(3) AS THE ADHESIVES USED FOR ADHERING UPPER/LOWER POLARIZES
(4) LIGHTLY WIPE TO CLEAN THE DIRTY SURFACE WITH ABSORBENT
AS THIS MODULE IS PROVIDED WITH C-MOS LSI, THE CARE TO TAKE
SUCH A PRECAUTION AS TO GROUNDING THE OPERATOR’S BODY IS
REQUIRED WHEN HANDLING IT.
INPUT SIGNALS SHOULD NOT BE APPLIED TO LCD MODULE BEFORE
POWER SUPPLY VOLTAGE IS APPLIED AND REACHES TO SPECIFIED
VOLTAGE (5+/-0.25V) IF ABOVE SEQUENCE IS NOT KEPT, C-MOS LSI OF
LCD MODULES MAY BE DAMAGED DUE TO LATCH UP PROBLEM.
HUMIDITY FOR A LONG PERIOD OF TIME. FOR THEIR STORAGE IN
THE PLACE WHERE TEMPERATURE IS 35 C OR HIGHER, SPECIAL CARE
TO PREVENT THEM FROM HIGH HUMIDITY IS REQUIRED. A
COMBINATION OF HIGH TEMPERATURE AND HIGH HUMIDITY MAY
CAUSE THEM POLARIZATION DEGRADATION AS WELL AS BUBBLE
GENERATION AND POLARIZER PEEL-OFF. PLEASE KEEP THE
TEMPERATURE AND HUMIDITY WITHIN THE SPECIFIED RANGE FOR USE
AND STORING.
BE EASILY DAMAGED, THEY SHOULD BE HANDLED WITH FULL CARE
SO AS NOT TO GET THEM TOUCHED, PUSHED OR RUBBED BY A
PIECE OF GLASS. TWEEZERS AND ANYTHING ELSE WHICH ARE
HARDER THAN A PENCIL LEAD 3H.
AND ALUMINUM PLATES ARE MADE OF ORGANIC SUBSTANCES WHICH
WILL BE DETERIORATED BY A CHEMICAL REACTION WITH SUCH
CHEMICALS AS ACETONE, TULUENE ETHANOLE AND ISOPROPYLALCOHIL.
THE FOLLOWING SOLVENTS ARE RECOMMENDED FOR USE:
PLEASE CONTACT US WHEN IT IS NECESSARY FOR YOU TO USE
CHEMICALS OTHER THAN THE ABOVE.
COTTON WASTE OR OTHER SOFT MATERIAL LIKE CHAMOIS, SOAKED IN
THE CHEMICALS RECOMMENDED WITHOUT SCRUBBING IT HARDLY.
TO PREVENT THE DISPLAY SURFACE FROM DAMAGE AND KEEP THE
APPEARANCE IN GOOD STATE, IT IS SUFFICIENT, IN GENERAL, TO WIPE
IT WITH ABSORBENT COTTON.
DATE FEB.10.’98
NORMAL HEXANE
No.
Sh.
7B64PS 2711-LMG7520RPFC-4 PAGE 11-2/4